Not Recommended for New Design
AH477
Single Phase Hall Effect Latch
Features
General Description
AH477 is the integrated Hall sensor with output
drivers designed for electrical commutation of
brush-less DC motor application. The devices are
included as follows: on-chip Hall voltage generator
for magnetic sensing; the error amplifier that
amplifies the Hall voltage; a comparator is to
provide switching hysteresis for noise rejection; the
bi-direction drivers for sinking and driving large
current load. Internal bandgap regulator is used to
provide temperature compensated bias for internal
circuits and allows a wide operating supply voltage
range.
-On-chip Hall sensor
-Bi-direction H type output drivers for single coil
-Internal bandgap regulator allows temperature
compensated operations and a wide operating
voltage range
-High output sourcing/sinking capability up to
300mA
-Operating voltage: 3.5V~20V
-Low output switching current noise
-SIP-4L package for AH477
Applications
If a magnetic flux density larger than threshold Bop,
DO is turned to sink and DOB is turned to drive.
The output state is held until a magnetic flux density
reversal falls below Brp causing DO to be turned to
drive and DOB turned to sink.
-Single-coil Brush-less DC Fan
-Single-coil Brush-less DC Motor
AH477 is rated for operation over-temperature
range from -20 oC to 85 oC and voltage range from
3.5V to 20V. The devices are available in low cost
die forms or rugged SIP-4
Pin Descriptions
SIP-4L(AH477)
Pin Configuration
Front View
Name
Vcc
P/I/O Pin #
Description
Positive Power Supply
Output Pin
AH477
P
O
O
P
1
2
3
4
DO
DOB
Vss
Output Pin
Ground
1 2 3 4
SIP-4L
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev.1.0 Dec 13, 2005
1/5