The Communications Edge
TM
AG201-86
InGaP HBT Gain Block
Product Information
Product Features
Product Description
Functional Diagram
GND
The AG201-86 is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 900 MHz, the AG201-86 typically provides
11 dB gain, +19.5 dBm OIP3, and +6.5 dBm P1dB. The
device combines dependable performance with consistent
quality to maintain MTTF values exceeding 100 years at
mounting temperatures of +85 qC & is housed in a SOT-86
(micro-X) industry-standard SMT lead-free/green/RoHS-
compliant package.
xꢀ DC – 6000 MHz
4
xꢀ +6.5 dBm P1dB at 900 MHz
xꢀ +19.5 dBm OIP3 at 900 MHz
xꢀ 11 dB Gain at 900 MHz
xꢀ Single Voltage Supply
xꢀ Green SOT-86 SMT Package
xꢀ Internally matched to 50 :
1
3
RF Out
RF In
2
GND
The AG201-86 consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation.
Function
Pin No.
Input
1
3
2, 4
Applications
Output/Bias
Ground
xꢀ Mobile Infrastructure
xꢀ CATV / DBS
xꢀ W-LAN / ISM
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the AG201-86 will work for other various applications
within the DC to 6 GHz frequency range such as CATV
and fixed wireless.
xꢀ RFID
xꢀ Defense / Homeland Security
xꢀ Fixed Wireless
Specifications (1)
Typical Performance (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output IP3 (2)
Output IP2
Output P1dB
Noise Figure
Test Frequency
Gain
Output IP3 (2)
Output P1dB
Device Voltage
Device Current
Units Min Typ Max
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
Typical
MHz
MHz
dB
DC
6000
500
11.0
-25
-18
+6.7
900
1900
2140
10.4
-16
-14
+5.4
10.9
-25
10.6
-25
900
10.9
25
-20
-18
dB
+6.7
+6.1
dB
20
+19.6 +19.3 +18.4 +18.0
4.4 4.4 4.5 4.5
dBm
dBm
dBm
dB
+19.3
+27
+6.7
4.4
MHz
dB
dBm
dBm
V
1900
10.6
+18.4
+6.1
4.0
9.6
11.6
mA
20
1. Test conditions: 25º C, Supply Voltage = +5 V, Rbias = 49.9 , 50 System.
2. 3OIP measured with two tones at an output power of -10 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Absolute Maximum Rating
Ordering Information
Parameter
Rating
Part No.
AG201-86*
Description
Operating Case Temperature
Storage Temperature
DC Voltage
-40 to +85 qC
-55 to +125 qC
+4.5 V
InGaP HBT Gain Block
(lead-tin SOT-86 Pkg)
InGaP HBT Gain Block
AG201-86G
RF Input Power (continuous)
Junction Temperature
+10 dBm
+250 qC
(lead-free/green/RoHS-compliant SOT-86 Pkg)
AG201-86PCB 700 – 2400 MHz Fully Assembled Eval. Board
This package is being phased out in favor of the green package type which is backwards compatible for
existing designs. Refer to Product Change Notification WJPCN06MAY05TC1 on the WJ website.
*
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com
Web site: www.wj.com
Page 1 of 6 June 2005