Multiport Internet
Gateway Processor
a
ADSP-21mod970
FEATURES
PERFORMANCE
SYSTEM CONFIGURATION
16-Bit Internal DMA Port for High Speed Access to On-
Chip Memory (Mode Selectable)
Programmable Multichannel Serial Port Supports
24 Channels/32 Channels
Two Double-Buffered Serial Ports with Companding
Hardware and Automatic Data Buffering
Separate RESET Pins for Each Internal Processor
Complete Single-Chip Multiport Internet Gateway
Processor (No External Memory Required)
Implements Six Modem Channels in One Package
Each Processor Can Implement V.34/V.90 Data/Fax
Modem (Includes Datapump and Controller)
312 MIPS Sustained Performance, 19 ns Instruction Time
@ 3.3 V
Open Architecture Extensible to Voice Over IP and Other
Applications
Low Power Dissipation, 100 mW (Typical) per Digital
Modem Processor
Power-Down Mode Featuring Low CMOS Standby
Power Dissipation
GENERAL DESCRIPTION
The ADSP-21mod970 is a Multiport Internet Gateway Pro-
cessor optimized for implementation of a complete V.34/56K
modem. All data pump and controller functions can be imple-
mented on a single device, offering the lowest power consump-
tion and highest possible modem port density.
The ADSP-21mod970 combines the ADSP-2100 family base
architecture (three computational units, data address generators
and a program sequencer) with two serial ports, a 16-bit internal
DMA port, a byte DMA port, a programmable timer, Flag I/O,
extensive interrupt capabilities and on-chip program and data
memory.
INTEGRATION
ADSP-2100 Family Code Compatible, with Instruction
Set Extensions
960K Bytes of On-Chip RAM, Configured as 576K Bytes
of Program Memory and 384K Bytes of Data Memory
Dual Purpose Program Memory for Both Instruction
and Data Storage
304-Ball PBGA with a 1.45 Square Inch (961 sq. mm)
Footprint
The ADSP-21mod970 integrates 960 bytes of on-chip memory,
configured as 192K words (24-bit) of program RAM, and 192K
words (16-bit) of data RAM. Power-down circuitry is also
provided to meet the low power needs of battery operated por-
table equipment. The ADSP-21mod970 is available in a
31 sq-mm., 304-lead PBGA package.
FUNCTIONAL BLOCK DIAGRAM
16
55
DATA<23:8>
CLKIN
GROUND
27
V
DD
16
4
IAD<15:0>
IDMA CNTL
MODEM
CHANNEL
2
MODEM
CHANNEL
3
MODEM
CHANNEL
4
MODEM
CHANNEL
5
MODEM
CHANNEL
6
4
4
8
4
SPORT0A
SPORT1
SPORT0B
EMULATOR
6
6
BR<5:0>
MODEM
CHANNEL
1
BG<5:0>
BGH<5:0>
FLAGS
ADSP-21mod970
6
66
6
IDMA CNTL = IAL, IRD, IWR, IACK
FLAGS = FL<0:2>, PF<0:7>
BUS CNTL = A0, BMS, PMS, DMS, CMS, IOMS, RD, WR
EMULATOR = EMS, EINT, ELIN, EBR, EBG, ECLK,
ELOUT, ERESET
16
16
9
RESET<5:0>
DATA<23:8>_1
IAD<15:0>_1
6
CLKOUT<5:0>
EE<5:0>
6
CLKIN_1,
BUS CNTL_1
6
IS<5:0>
SPORT0A, SPORT0B = RFS0, DR0, DT0, SCLK0
SPORT1 = RFS1, DR1, SCLK1, TFS1
6
4
TFS0<5:0>
DT1<5:0>
IDMA CNTL_1
6
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 1999