Dual, 200 mA, Low Noise,
High PSRR Voltage Regulator
Data Sheet
ADP220/ADP221
FEATURES
TYPICAL APPLICATION CIRCUITS
1
2
Input voltage range: 2.5 V to 5.5 V
Dual independent 200 mA low dropout voltage regulators
Miniature 6-ball, 1.0 mm × 1.5 mm WLCSP and 6-ball
bumped bare die
ON
V
= 2.8V
OUT1
A
B
EN1
VOUT1
OFF
1µF
Initial accuracy: 1%
V
= 3.3V
IN
Stable with 1 µF ceramic output capacitors
No noise bypass capacitor required
Two independent logic controlled enables
Overcurrent and thermal protection
Active output pull-down (ADP221)
Key specifications
GND
VIN
1µF
TOP VIEW
(Not to Scale)
ON
V
= 2.8V
OUT2
C
EN2
VOUT2
OFF
1µF
High PSRR
76 dB PSRR up to 1 kHz
Figure 1. Typical Application Circuit
70 dB PSRR at 10 kHz
60 dB PSRR at 100 kHz
40 dB PSRR at 1 MHz
VIN
VOUT1
Low output noise
60Ω
27 µV rms typical output noise at VOUT = 1.2 V
50 µV rms typical output noise at VOUT = 2.8 V
Excellent transient response
THERMAL
SHUTDOWN
CURRENT
LIMIT
Low dropout voltage: 150 mV @ 200 mA load
60 µA typical ground current at no load, both LDOs enabled
100 µs fast turn-on circuit
EN1
EN2
CONTROL
LOGIC
AND
ADP221
ONLY
REFERENCE
ENABLE
Guaranteed 200 mA output current per regulator
−40°C to +125°C junction temperature
ADP220
CURRENT
LIMIT
APPLICATIONS
GND
60Ω
Mobile phones
VOUT2
Digital cameras and audio devices
Portable and battery-powered equipment
Portable medical devices
Figure 2. Block Diagram of the ADP220/ADP221
Post dc-to-dc regulation
GENERAL DESCRIPTION
The 200 mA dual output ADP220/ADP221 combine high PSRR,
low noise, low quiescent current, and low dropout voltage in a
voltage regulator ideally suited for wireless applications with
demanding performance and board space requirements.
without the need for a noise bypass capacitor. The ADP221 also
includes an active pull-down to quickly discharge output loads.
The ADP220/ADP221 are available in a miniature 6-ball
WLCSP package and 6-ball bumped bare die and is stable with
tiny 1 µF 30% ceramic output capacitors, resulting in the smallest
possible board area for a wide variety of portable power needs.
The low quiescent current, low dropout voltage, and wide input
voltage range of the ADP220/ADP221 extend the battery life of
portable devices. The ADP220/ADP221 maintain power supply
rejection greater than 60 dB for frequencies as high as 100 kHz
while operating with a low headroom voltage. The ADP220
offers much lower noise performance than competing LDOs
The ADP220/ADP221 are available in many output voltage
combinations, ranging from 0.8 V to 3.3 V, and offer overcur-
rent and thermal protection to prevent damage in adverse
conditions.
Rev. H
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com