Dual, 300 mA Output, Low Noise,
High PSRR Voltage Regulators
ADP222/ADP223/ADP224/ADP225
FEATURES
TYPICAL APPLICATION CIRCUITS
= 4.2V
V
IN
Input voltage range: 2.5 V to 5.5 V
Small, 8-lead, 2 mm × 2 mm LFCSP package
Initial accuracy: 1ꢀ
High PSRR: 70 dB at 10 kHz, 60 dB at 100 kHz, 40 dB at 1 MHz
Low noise: 27 μV rms at VOUT = 1.2 V, 50 μV rms at VOUT = 2.8 V
Excellent transient response
Low dropout voltage: 170 mV at 300 mA load
65 μA typical ground current at no load, both LDOs enabled
Quick output discharge (QOD)—ADP224/ADP225
Overcurrent and thermal protection
+
C1
1µF
R2
R1
ON
OFF
1
2
3
4
8
7
6
5
EN1
ADJ1
ADP223/
ADP225
ON
OFF
VOUT2 = 2.0V
EN2
VOUT1
+
C2
1µF
GND
ADJ2
VIN
VOUT1 = 2.8V
VOUT2
+
C3
1µF
R3
R4
APPLICATIONS
Mobile phones
Digital camera and audio devices
Portable and battery-powered equipment
Portable medical devices
Figure 1. ADP223/ADP225
V
= 4.2V
IN
+
C1
1µF
Post dc-to-dc regulation
ON
ON
OFF
1
2
3
4
8
EN1
SENSE1
ADP222/
ADP224
OFF
VOUT1 = 1.5V
7
6
5
EN2
VOUT1
+
C2
1µF
GND
VIN
VOUT2 = 3.3V
SENSE2
VOUT2
+
C3
1µF
Figure 2. ADP222/ADP224
GENERAL DESCRIPTION
The 300 mA, adjustable dual output ADP223/ADP225 and
fixed dual output ADP222/ADP224 combine high PSRR, low
noise, low quiescent current, and low dropout voltage in a
voltage regulator that is ideally suited for wireless applications
with demanding performance and board space requirements.
ADP222/ADP223/ADP224/ADP225 offer much lower noise
performance than competing LDOs without the need for a
noise bypass capacitor. Overcurrent and thermal protection
circuitry prevent damage in adverse conditions.
The ADP224 and ADP225 are identical to the ADP222 and
ADP223, respectively, but with the addition of a quick output
discharge (QOD) feature.
The low quiescent current, low dropout voltage, and wide input
voltage range of the ADP222/ADP223/ADP224/ADP225
extend the battery life of portable devices.
The ADP222/ADP223/ADP224/ADP225 are available in a
small 8-lead, 2 mm × 2 mm LFCSP package and are stable with
tiny 1 μF, 30ꢀ ceramic output capacitors, resulting in the smallest
possible board area for a wide variety of portable power needs.
The ADP222/ADP223/ADP224/ADP225 maintain power
supply rejection greater than 60 dB for frequencies as high as
100 kHz while operating with a low headroom voltage. The
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2011 Analog Devices, Inc. All rights reserved.