Dual, 300 mA Output, Low Noise,
High PSRR Voltage Regulators
Data Sheet
ADP222/ADP223/ADP224/ADP225
FEATURES
TYPICAL APPLICATION CIRCUITS
V
= 4.2V
IN
Input voltage range: 2.5 V to 5.5 V
Small, 8-lead, 2 mm × 2 mm LFCSP package
Initial accuracy: 1%
+
C1
1µF
R1
R2
ON
OFF
High PSRR: 70 dB at 10 kHz, 60 dB at 100 kHz, 40 dB at 1 MHz
Low noise: 27 µV rms at VOUT = 1.2 V, 50 µV rms at VOUT = 2.8 V
Excellent transient response
Low dropout voltage: 170 mV at 300 mA load
65 µA typical ground current at no load, both LDOs enabled
Fixed output voltage from 0.8 V to 3.3 V (ADP222/ADP224)
Adjustable output voltage range from 0.5 V to 5.0 V
(ADP223/ADP225)
1
2
3
4
8
7
6
5
EN1
ADJ1
ADP223/
ADP225
ON
OFF
VOUT1 = 2.0V
EN2
VOUT1
+
C2
1µF
GND
ADJ2
VIN
VOUT2 = 2.8V
VOUT2
+
C3
1µF
R3
R4
Quick output discharge (QOD)—ADP224/ADP225
Overcurrent and thermal protection
Figure 1. ADP223/ADP225
APPLICATIONS
V
= 4.2V
IN
+
Portable and battery-powered equipment
Portable medical devices
Post dc-to-dc regulation
Point of sale terminals
C1
1µF
ON
ON
OFF
1
2
3
4
8
EN1
SENSE1
ADP222/
ADP224
Credit card readers
OFF
VOUT1 = 1.5V
7
6
5
EN2
VOUT1
Automatic meter readers
Wireless network equipment
+
C2
1µF
GND
VIN
VOUT2 = 3.3V
SENSE2
VOUT2
+
C3
1µF
Figure 2. ADP222/ADP224
GENERAL DESCRIPTION
The 300 mA, adjustable dual output ADP223/ADP225 and
fixed dual output ADP222/ADP224 combine high PSRR, low
noise, low quiescent current, and low dropout voltage in a
voltage regulator that is ideally suited for wireless applications
with demanding performance and board space requirements.
100 kHz while operating with a low headroom voltage. The
ADP222/ADP223/ADP224/ADP225 offer much lower noise
performance than competing LDOs without the need for a
noise bypass capacitor. Overcurrent and thermal protection
circuitry prevent damage in adverse conditions.
The ADP222/ADP224 are available with fixed outputs voltages
from 0.8V to 3.3V. The adjustable output ADP223/ADP225 may
be set to output voltages from 0.5 V to 5.0 V. The low quiescent
current, low dropout voltage, and wide input voltage range of
the ADP222/ADP223/ADP224/ADP225 extend the battery life
of portable devices.
The ADP224 and ADP225 are identical to the ADP222 and
ADP223, respectively, but with the addition of a quick output
discharge (QOD) feature.
The ADP222/ADP223/ADP224/ADP225 are available in a
small 8-lead, 2 mm × 2 mm LFCSP package and are stable with
tiny 1 µF, 30% ceramic output capacitors, resulting in the smallest
possible board area for a wide variety of portable power needs.
The ADP222/ADP223/ADP224/ADP225 maintain power
supply rejection greater than 60 dB for frequencies as high as
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com