16-Bit, 310 MSPS, 3.3 V/1.8 V Dual
Analog-to-Digital Converter (ADC)
Data Sheet
AD9652
FEATURES
High dynamic range
FUNCTIONAL BLOCK DIAGRAM
AVDD3
AVDD
SDIO SCLK CSB
DRVDD
SNR = 75.0 dBFS at 70 MHz (AIN = −1 dBFS)
SFDR = 87 dBc at 70 MHz (AIN = −1 dBFS)
Noise spectral density (NSD) = −156.7 dBFS/Hz input noise
at −1 dBFS at 70 MHz
SPI
AD9652
OR+, OR–
PROGRAMMING DATA
NSD = −157.6 dBFS/Hz for small signal at −7dBFS at 70 MHz
90 dB channel isolation/crosstalk
On-chip dithering (improves small signal linearity)
Excellent IF sampling performance
SNR = 73.7 dBFS at 170 MHz (AIN = −1 dBFS)
SFDR = 85 dBc at 170 MHz (AIN = −1 dBFS)
Full power bandwidth of 465 MHz
VIN+A
VIN–A
DDR DATA
INTERLEAVER
LVDS OUTPUT
DRIVER
D15± (MSB)
TO
16
ADC
D0± (LSB)*
VREF
CLK+
CLK–
DIVIDE 1
TO 8
SENSE
DCO+
DCO–
REF
SELECT
DUTY CYCLE
DCO
STABILIZER GENERATION
VCM
RBIAS
VIN–B
VIN+B
On-chip 3.3 V buffer
Programmable input span of 2 V p-p to 2.5 V p-p (default)
Differential clock input receiver with 1, 2, 4, and 8 integer
inputs (clock divider input accepts up to 1.24 GHz)
Internal ADC clock duty cycle stabilizer
SYNC input allows multichip synchronization
Total power consumption: 2.16 W
3.3 V and 1.8 V supply voltages
DDR LVDS (ANSI-644 levels) outputs
Serial port control
ADC
MULTICHIP
SYNC
AGND
SYNC
PDWN
*THESE PINS ARE FOR CHANNEL A AND CHANNEL B.
Figure 1.
Energy saving power-down modes
APPLICATIONS
Military radar and communications
Multimode digital receivers (3G or 4G)
Test and instrumentation
Smart antenna systems
The 16-bit output data (with an overrange bit) from each ADC
is interleaved onto a single LVDS output port along with a
double data rate (DDR) clock. Programming for setup and control
are accomplished using a 3-wire SPI-compatible serial interface.
GENERAL DESCRIPTION
The AD9652 is a dual, 16-bit analog-to-digital converter (ADC)
with sampling speeds of up to 310 MSPS. It is designed to
support demanding, high speed signal processing applications
that require exceptional dynamic range over a wide input
frequency range (up to 465 MHz). Its exceptional low noise
floor of −157.6 dBFS and large signal spurious-free dynamic
range (SFDR) performance (exceeding 85 dBFS, typical) allows
low level signals to be resolved in the presence of large signals.
The AD9652 is available in a 144-ball CSP_BGA and is
specified over the industrial temperature range of −40°C to
+85°C. This product is protected by pending U.S. patents.
PRODUCT HIGHLIGHTS
1. Integrated dual, 16-bit, 310 MSPS ADCs.
2. On-chip buffer simplifies ADC driver interface.
3. Operation from 3.3 V and 1.8 V supplies and a separate
digital output driver supply accommodating LVDS outputs.
4. Proprietary differential input maintains excellent signal-to-
noise ratio (SNR) performance for input frequencies of up
to 485 MHz.
5. SYNC input allows synchronization of multiple devices.
6. Three-wire, 3.3 V or 1.8 V SPI port for register programming
and readback.
The dual ADC cores feature a multistage, pipelined architecture
with integrated output error correction logic. A high performance
on-chip buffer and internal voltage reference simplify the inter-
face to external driving circuitry while preserving the exceptional
performance of the ADC.
The AD9652 can support input clock frequencies of up to
1.24 GHz with a 1, 2, 4, and 8 integer clock divider to generate
the ADC sample clock. A duty cycle stabilizer is provided to
compensate for variations in the ADC clock duty cycle.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com