10-Bit Monitor and Control System with ADC,
DACs, Temperature Sensor, and GPIOs
Data Sheet
AD7292
FEATURES
FUNCTIONAL BLOCK DIAGRAM
REF
REF DV
IN
AV
V
DD DRIVE
OUT
DD
10-bit SAR ADC
8 multiplexed analog input channels
Single-ended mode of operation
Differential mode of operation
5 V analog input range
TEMPERATURE
SENSOR
÷4
AD7292
1.25V
REF
BUF
BUF
VIN0
VIN1
VIN2
VIN3
VIN4
VIN5
VIN6
VIN7
10-BIT
DAC
V
REF, 2 × VREF, or 4 × VREF input ranges
VOUT0
VOUT1
VOUT2
VOUT3
Input measured with respect to AGND or VDD
4 monotonic, 10-bit, 5 V DACs
2 µs settling time
10-BIT
SAR ADC
CONTROL
LOGIC
10-BIT
DAC
MUX
T/H
Power-on reset to 0 V
10-BIT
DAC
10 mA sink and source capability
Internal temperature sensor
1°C accuracy
12 general-purpose digital I/O pins
Internal 1.25 V reference
10-BIT
DAC
ALERT AND LIMIT
REGISTERS
Built-in monitoring features
Minimum and maximum value register for each channel
Programmable alert thresholds
Programmable hysteresis
SPI
INTERFACE
DIGITAL I/Os
SPI interface
Temperature range: −40°C to +125°C
Package type: 36-lead LFCSP
APPLICATIONS
Base station power amplifier (PA) monitoring and control
RF control loops
Optical communication system control
General-purpose system monitoring and control
Figure 1.
GENERAL DESCRIPTION
The AD7292 contains all the functionality required for general-
purpose monitoring of analog signals and control of external
devices, integrated into a single-chip solution. The AD7292
features an 8-channel, 10-bit SAR ADC, four 10-bit DACs, a
1°C accurate internal temperature sensor, and 12 GPIOs to
aid system monitoring and control.
Four 10-bit digital-to-analog converters (DACs) provide outputs
from 0 V to 5 V. A n internal, high accuracy, 1.25 V reference
provides a separately buffered reference source for both the ADC
and the DACs.
A high accuracy band gap temperature sensor is monitored and
digitized by the 10-bit ADC to give a resolution of 0.03125°C.
The AD7292 also features built-in limit and alarm functions.
The 10-bit, high speed, low power successive approximation
register (SAR) ADC is designed to monitor a variety of single-
ended input signals. Differential operation is also available by
configuring VIN0 and VIN1 to operate as a differential pair.
The AD7292 is a highly integrated solution offered in a 36-lead
LFCSP package with an operating temperature range of −40°C
to +125°C.
The AD7292 offers a register programmable ADC sequencer,
which enables the selection of a programmable sequence of
channels for conversion.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com