Dual 12-/14-/16-Bit nanoDAC® with
5 ppm/°C On-Chip Reference
Data Sheet
AD5623R/AD5643R/AD5663R
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
V
/V
DD
REFIN REFOUT
Low power, smallest pin-compatible, dual nanoDAC
AD5663R: 16 bits
1.25V/2.5V
REFERENCE
LDAC
AD5643R: 14 bits
AD5623R: 12 bits
User-selectable external or internal reference
External reference default
INPUT
DAC
STRING
DAC A
V
V
A
SCLK
SYNC
DIN
BUFFER
OUT
OUT
REGISTER
REGISTER
INTERFACE
LOGIC
INPUT
REGISTER
DAC
REGISTER
STRING
DAC B
B
BUFFER
On-chip 1.25 V/2.5 V, 5 ppm/°C reference
10-lead MSOP and 3 mm × 3 mm LFCSP
2.7 V to 5.5 V power supply
AD5623R/AD5643R/AD5663R
POWER-ON
RESET
POWER-DOWN
LOGIC
Guaranteed monotonic by design
Power-on reset to zero scale
Per channel power-down
LDAC CLR
GND
Figure 1.
Table 1. Related Devices
Serial interface up to 50 MHz
Part No.
Description
LDAC
CLR
functions
Hardware
and
AD5663
2.7 V to 5.5 V, dual 16-bit nanoDAC, with external
reference
APPLICATIONS
Process control
Data acquisition systems
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
GENERAL DESCRIPTION
The AD5623R/AD5643R/AD5663R, members of the nanoDAC
family, are low power, dual 12-, 14-, and 16-bit buffered voltage-
out digital-to-analog converters (DAC) that operate from a single
2.7 V to 5.5 V supply and are guaranteed monotonic by design.
The low power consumption of this part in normal operation
makes it ideally suited to portable, battery-operated equipment.
The AD5623R/AD5643R/AD5663R use a versatile, 3-wire serial
interface that operates at clock rates up to 50 MHz, and they are
compatible with standard SPI®, QSPI™, MICROWIRE™, and
DSP interface standards. The on-chip precision output amplifier
enables rail-to-rail output swing to be achieved.
The AD5623R/AD5643R/AD5663R have an on-chip reference.
The AD5623R-3/AD5643R-3/AD5663R-3 have a 1.25 V, 5 ppm/°C
reference, giving a full-scale output of 2.5 V; and the AD5623R-5/
AD5643R-5/AD5663R-5 have a 2.5 V, 5 ppm/°C reference,
giving a full-scale output of 5 V. The on-chip reference is off at
power-up, allowing the use of an external reference; and all
devices can be operated from a single 2.7 V to 5.5 V supply.
The internal reference is turned on by writing to the DAC.
PRODUCT HIGHLIGHTS
1. Dual 12-, 14-, and 16-bit DAC.
2. On-chip 1.25 V/2.5 V, 5 ppm/°C reference.
3. Available in 10-lead MSOP and 10-lead, 3 mm ×
3 mm LFCSP.
The parts incorporate a power-on reset circuit that ensures the
DAC output powers up to 0 V and remains there until a valid
write takes place. The part contains a power-down feature that
reduces the current consumption of the device to 480 nA at 5 V
and provides software-selectable output loads while in power-
down mode.
4. Low power; typically consumes 0.6 mW at 3 V and
1.25 mW at 5 V.
5. 4.5 μs maximum settling time for the AD5623R.
Rev. F
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2006–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com