2.7 V to 5.5 V, 450 µA, Rail-to-Rail Output,
Quad, 12-/16-Bit nanoDACs
Data Sheet
AD5624/AD5664
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
REF
V
DD
GND
Low power, quad nanoDACs
AD5664: 16 bits
AD5624/AD5664
BUFFER
AD5624: 12 bits
INPUT
REGISTER
DAC
REGISTER
STRING
DAC A
V
V
V
V
A
B
C
D
OUT
OUT
OUT
OUT
Relative accuracy: 12 LSBs max
Guaranteed monotonic by design
10-lead MSOP and 3 mm × 3 mm LFCSP_WD
2.7 V to 5.5 V power supply
Power-on reset to zero
SCLK
SYNC
INPUT
DAC
STRING
DAC B
BUFFER
BUFFER
BUFFER
INTERFACE
LOGIC
REGISTER
REGISTER
INPUT
REGISTER
DAC
REGISTER
STRING
DAC C
DIN
Per channel power-down
Serial interface, up to 50 MHz
INPUT
REGISTER
DAC
REGISTER
STRING
DAC D
POWER-ON
RESET
POWER-DOWN
LOGIC
APPLICATIONS
Figure 1.
Process control
Data acquisition systems
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
GENERAL DESCRIPTION
The AD5624/AD5664, members of the nanoDAC® family, are
low power, quad, 12-, 16-bit buffered voltage-out DACs that
operate from a single 2.7 V to 5.5 V supply and are guaranteed
monotonic by design.
The AD5624/AD5664 use a versatile 3-wire serial interface that
operates at clock rates up to 50 MHz, and are compatible with
standard SPI®, QSPI™, MICROWIRE™, and DSP interface
standards.
PRODUCT HIGHLIGHTS
The AD5624/AD5664 require an external reference voltage to
set the output range of the DAC. The device incorporates a
power-on reset circuit that ensures the DAC output powers up
to 0 V and remains there until a valid write takes place. The
devices contain a power-down feature that reduces the current
consumption of the device to 480 nA at 5 V and provides
software-selectable output loads while in power-down mode.
1. Relative accuracy: 12 ꢀSBs maximum.
2. Available in 10-lead MSOP and 10-lead, 3 mm × 3 mm,
ꢀFCSP_WD.
3. ꢀow power, typically consumes 1.32 mW at 3 V and
2.25 mW at 5 V.
4. Maximum settling time of 4.5 ꢁs (AD5624) and 7 ꢁs
(AD5664).
The low power consumption of these devices in normal
operation makes them ideally suited to portable battery-
operated equipment. The power consumption is 2.25 mW at 5
V, going down to 2.4 μW in power-down mode.
Table 1. Related Devices
Part No.
Description
AD5624R/AD5644R/AD5664R 2.7 V to 5.5 V quad, 12-, 14-,
The AD5624/AD5664 on-chip precision output amplifier allows
rail-to-rail output swing to be achieved.
16-bit DACs with internal
reference
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject tochange without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2006–2018 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com