Quad, 12-/14-/16-Bit nanoDACs® with
5 ppm/°C On-Chip Reference
AD5624R/AD5644R/AD5664R
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
V
/V
DD
GND
REFIN REFOUT
Low power, smallest pin-compatible, quad nanoDACs
AD5664R: 16 bits
1.25V/2.5V REF
AD5624R/AD5644R/AD5664R
AD5644R: 14 bits
AD5624R: 12 bits
INPUT
DAC
STRING
DAC A
V
V
V
V
A
B
C
D
BUFFER
BUFFER
BUFFER
BUFFER
OUT
OUT
OUT
OUT
REGISTER
REGISTER
SCLK
SYNC
INPUT
REGISTER
DAC
REGISTER
STRING
DAC B
User selectable external or internal reference
External reference default
On-chip 1.25 V/2.5 V, 5 ppm/°C reference
10-lead MSOP and 3 mm × 3 mm LFCSP_WD
2.7 V to 5.5 V power supply
INTERFACE
LOGIC
INPUT
REGISTER
DAC
REGISTER
STRING
DAC C
DIN
INPUT
REGISTER
DAC
REGISTER
STRING
DAC D
Guaranteed monotonic by design
Power-on reset to zero scale
Per channel power-down
POWER-ON
RESET
POWER-DOWN
LOGIC
Figure 1.
Serial interface, up to 50 MHz
Table 1. Related Devices
Part No.
Description
APPLICATIONS
Process control
AD5624/AD5664
2.7 V to 5.5 V quad, 12-/16-bit
DACs, external reference
AD5666
2.7 V to 5.5 V quad 16-bit DAC,
internal reference, LDAC, CLR pins
Data acquisition systems
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
GENERAL DESCRIPTION
The AD5624R/AD5644R/AD5664R, members of the nanoDAC
family, are low power, quad, 12-/14-/16-bit buffered voltage-out
DACs. All devices operate from a single 2.7 V to 5.5 V supply
and are guaranteed monotonic by design.
while in power-down mode. The low power consumption of
this part in normal operation makes it ideally suited to portable
battery-operated equipment.
The AD5624R/AD5644R/AD5664R use a versatile 3-wire serial
interface that operates at clock rates up to 50 MHz, and is
compatible with standard SPI®, QSPI™, MICROWIRE™, and
DSP interface standards. The on-chip precision output amplifier
enables rail-to-rail output swing.
The AD5624R/AD5644R/AD5664R have an on-chip reference.
The AD56x4R-3 has a 1.25 V, 5 ppm/°C reference, giving a full-
scale output range of 2.5 V; the AD56x4R-5 has a 2.5 V,
5 ppm/°C reference giving a full-scale output range of 5 V. The
on-chip reference is off at power-up allowing the use of an
external reference and all devices can be operated from a single
2.7 V to 5.5 V supply. The internal reference is enabled via a
software write.
PRODUCT HIGHLIGHTS
1. Quad 12-/14-/16-bit DACs.
2. On-chip 1.25 V/2.5 V, 5 ppm/°C reference.
The part incorporates a power-on reset circuit that ensures the
DAC output powers up to 0 V and remains there until a valid
write takes place. The part contains a per-channel power-down
feature that reduces the current consumption of the device to
480 nA at 5 V and provides software-selectable output loads
3. Available in 10-lead MSOP and 10-lead, 3 mm × 3 mm,
LFCSP_WD.
4. Low power, typically consumes 1.32 mW at 3 V and
2.25 mW at 5 V.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.