2.7 V to 5.5 V, 250 μA, Rail-to-Rail Output
16-Bit nanoDACTM in a SOT-23
AD5662
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
V
Low power (250 μA @ 5 V) single 16-bit nanoDAC
REF
DD
GND
12-bit accuracy guaranteed
POWER-ON
RESET
Tiny 8-lead SOT-23/MSOP package
Power-down to 480 nA @ 5 V, 100 nA @ 3 V
Power-on reset to zero scale/midscale
2.7 V to 5.5 V power supply
AD5662
V
FB
REF(+)
16-BIT
DAC
DAC
REGISTER
OUTPUT
BUFFER
V
OUT
Guaranteed 16-bit monotonic by design
3 power-down functions
Serial interface with Schmitt-triggered inputs
Rail-to-rail operation
INPUT
CONTROL
LOGIC
POWER-DOWN
CONTROL LOGIC
RESISTOR
NETWORK
SYNC interrupt facility
Temperature range −40°C to +125°C
Qualified for automotive applications
SYNC SCLK DIN
APPLICATIONS
Process control
Figure 1.
Data acquisition systems
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
GENERAL DESCRIPTION
The AD5662, a member of the nanoDAC family, is a low power,
single, 16-bit buffered voltage-out DAC that operates from a
single 2.7 V to 5.5 V supply and is guaranteed monotonic by
design.
The AD5662 uses a versatile 3-wire serial interface that operates
at clock rates up to 30 MHz, and is compatible with standard
SPI®, QSPI™, MICROWIRE™, and DSP interface standards.
PRODUCT HIGHLIGHTS
The AD5662 requires an external reference voltage to set the
output range of the DAC. The part incorporates a power-on
reset circuit that ensures the DAC output powers up to 0 V
(AD5662x-1) or to midscale (AD5662x-2), and remains there
until a valid write takes place. The part contains a power-down
feature that reduces the current consumption of the device to
480 nA at 5 V and provides software-selectable output loads
while in power-down mode.
1. 16-bit DAC—12-bit accuracy guaranteed.
2. Available in 8-lead SOT-23 and 8-lead MSOP packages.
3. Low power. Typically consumes 0.42 mW at 3 V and
0.75 mW at 5 V.
4. Power-on reset to zero scale or to midscale.
5. 10 μs max settling time.
The low power consumption of this part in normal operation
makes it ideally suited to portable battery-operated equipment.
The power consumption is 0.75 mW at 5 V, going down to
2.4 μW in power-down mode.
RELATED DEVICES
Part No.
Description
The AD5662’s on-chip precision output amplifier allows rail-to-
rail output swing to be achieved. For remote sensing applications,
the output amplifier’s inverting input is available to the user.
AD5620/AD5640/AD5660
3 V/5 V 12-/14-/16-bit DAC with
internal reference in SOT-23
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
©2005–2010 Analog Devices, Inc. All rights reserved.