2.5 V to 5.5 V, 500 A, Parallel Interface
Quad Voltage-Output 8-/10-/12-Bit DACs
a
AD5334/AD5335/AD5336/AD5344*
FEATURES
GENERAL DESCRIPTION
AD5334: Quad 8-Bit DAC in 24-Lead TSSOP
AD5335: Quad 10-Bit DAC in 24-Lead TSSOP
AD5336: Quad 10-Bit DAC in 28-Lead TSSOP
AD5344: Quad 12-Bit DAC in 28-Lead TSSOP
The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and
12-bit DACs. They operate from a 2.5 V to 5.5 V supply con-
suming just 500 µA at 3 V, and feature a power-down mode that
further reduces the current to 80 nA. These devices incorporate
Low Power Operation: 500 A @ 3 V, 600 A @ 5 V
Power-Down to 80 nA @ 3 V, 200 nA @ 5 V via PD Pin
2.5 V to 5.5 V Power Supply
an on-chip output buffer that can drive the output to both sup-
ply rails.
The AD5334/AD5335/AD5336/AD5344 have a parallel interface.
CS selects the device and data is loaded into the input registers
on the rising edge of WR.
Double-Buffered Input Logic
Guaranteed Monotonic by Design Over All Codes
Output Range: 0–VREF or 0–2 VREF
Power-On Reset to Zero Volts
The GAIN pin on the AD5334 and AD5336 allows the output
Simultaneous Update of DAC Outputs via LDAC Pin
Asynchronous CLR Facility
Low Power Parallel Data Interface
On-Chip Rail-to-Rail Output Buffer Amplifiers
Temperature Range: –40؇C to +105؇C
range to be set at 0 V to VREF or 0 V to 2 × VREF
.
Input data to the DACs is double-buffered, allowing simultaneous
update of multiple DACs in a system using the LDAC pin.
On the AD5334, AD5335 and AD5336 an asynchronous CLR
input is also provided. This resets the contents of the Input
Register and the DAC Register to all zeros. These devices also
incorporate a power-on-reset circuit that ensures that the DAC
output powers on to 0 V and remains there until valid data is
written to the device.
APPLICATIONS
Portable Battery-Powered Instruments
Digital Gain and Offset Adjustment
Programmable Voltage and Current Sources
Programmable Attenuators
The AD5334/AD5335/AD5336/AD5344 are available in Thin
Shrink Small Outline Packages (TSSOP).
Industrial Process Control
AD5334 FUNCTIONAL BLOCK DIAGRAM
(Other Diagrams Inside)
V
REF
A/B
V
DD
POWER-ON
RESET
AD5334
GAIN
DAC
INPUT
DB
8-BIT
DAC
7
.
BUFFER
V
V
A
B
REGISTER
REGISTER
OUT
.
.
DB
0
CS
WR
A0
DAC
REGISTER
INPUT
REGISTER
8-BIT
DAC
BUFFER
OUT
INTER-
FACE
LOGIC
DAC
INPUT
8-BIT
8-BIT
A1
BUFFER
BUFFER
V
V
C
D
REGISTER
REGISTER
OUT
DAC
DAC
DAC
REGISTER
INPUT
REGISTER
8-BIT
DAC
OUT
TO ALL DACS
AND BUFFERS
CLR
LDAC
POWER-DOWN
LOGIC
V
REF
C/D
GND
PD
*Protected by U.S. Patent Number 5,969,657; other patents pending.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
World Wide Web Site: http://www.analog.com
© Analog Devices, Inc., 2000