Datasheet > 853S111BI

853S111BI

更新时间： 2023-12-20 18:46:28

品牌	Logo	应用领域
瑞萨 - RENESAS		/
页数	文件大小	规格书
27页	890K
描述
Low Skew, 1-to-10 Differential-to-2.5V, 3.3V LVPECL / ECL Fanout Buffer

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

853S111BI 数据手册

853S111B Datasheet

Additive Phase Jitter

The spectral purity in a band at a specific offset from the fundamental

compared to the power of the fundamental is called the dBc Phase

Noise. This value is normally expressed using a Phase noise plot

and is most often the specified plot in many applications. Phase noise

is defined as the ratio of the noise power present in a 1Hz band at a

specified offset from the fundamental frequency to the power value of

the fundamental. This ratio is expressed in decibels (dBm) or a ratio

of the power in the 1Hz band to the power in the fundamental. When

the required offset is specified, the phase noise is called a dBc value,

which simply means dBm at a specified offset from the fundamental.

By investigating jitter in the frequency domain, we get a better

understanding of its effects on the desired application over the entire

time record of the signal. It is mathematically possible to calculate an

expected bit error rate given a phase noise plot.

Additive Phase Jitter @ 155.52MHz

12kHz to 20MHz = 0.03ps (typical)

Offset from Carrier Frequency (Hz)

As with most timing specifications, phase noise measurements have

issues relating to the limitations of the equipment. Often the noise

floor of the equipment is higher than the noise floor of the device. This

is illustrated above. The device meets the noise floor of what is

shown, but can actually be lower. The phase noise is dependent on

the input source and measurement equipment.

Rohde & Schwarz SMA100A Signal Generator 9kHz - 6GHz as

external input to a Hewlett Packard 8133A 3GHz Pulse Generator.

November 9, 2017

1...6 7 8910 11 12...27

下载PDF

型号	品牌	描述	获取价格	数据表
853S111BKILF	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格
853S111BKILF/W	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格
853S111BKILFT	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格
853S111BKILW	IDT	Low Skew Different ial-to-2 .5V, 3.3V LVPECL/ECL	获取价格
853S111BYILF	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格
853S111BYILFT	IDT	Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer	获取价格