Flash Cards
ATA45 Series
White Electronic Designs
ATA45 Series FLASH CARDS
8MB to 512MB
■
■
ISA standard and Read/Write unit is 512 bytes
(sector) sequential access
PRODUCT DESCRIPTION
ATA45 series Flash ATA cards are built with NAND flash
memory components operating as solid-state diskꢀ They
comply with the PC card ATA standard and are suitable
for use as a data storage memory medium for PCs or
other electronic equipmentꢀ The read/write unit is 1
sector (512 bytes) sequential accessꢀ
High performance:
Host data transfer rate
Flash data transfer rate
20ꢀ0 MB/sec
10ꢀ0 MB/sec
■
■
Maximum card density is 512 MB
3 variations of mode access
Memory card mode
I/O card mode
FEATURES
■
PC Card-ATA/True IDE/ I/O Card mode compatible
host interface
True-IDE mode
68 pin connector and type II stainless steel
housing
■
■
Internal self-diagnostic program operates at VCC
power on
Automatic sensing of PC Card ATA and IDE mode
Included 256-byte CIS ROM
High data reliability
Endurance: 100,000 Program / Erase cycles
Support the five PC Card ATA addressing modes
Host Interface bus width: 8/16-bit Access
Flash Interface bus width: 8-bit Access
Support 3 power save mode: standby / idle / active
Auto power down function
High reliability based on internal ECC (Error
Correcting Code) function 2-bit ECC
Data reliability is 1 error in 1014 bits readꢀ
■
Power Consumption
Active mode
Idle mode
Stop mode
30 mA (typꢀ), 40 mA (maxꢀ)
2-bit ECC function
10 mA
400 µA
■
Operating Voltage: 3ꢀ3 V and 5ꢀ0 V
CARD BLOCK DIAGRAM
Internal Vcc
Vcc
GND
Data
In/Out
Samsung
NAND
Flash
Host
Samsung
Interface
Controller
Control
July 2003 Revꢀ 0
ECO #16317
1
White Electronic Designs Corporation (508) 485-4000 wwwꢀwhiteedcꢀcom