5秒后页面跳转
74LVC1G123DC-Q100 PDF预览

74LVC1G123DC-Q100

更新时间: 2024-11-07 01:12:31
品牌 Logo 应用领域
安世 - NEXPERIA /
页数 文件大小 规格书
21页 286K
描述
Single retriggerable monostable multivibrator Schmitt trigger inputs

74LVC1G123DC-Q100 数据手册

 浏览型号74LVC1G123DC-Q100的Datasheet PDF文件第2页浏览型号74LVC1G123DC-Q100的Datasheet PDF文件第3页浏览型号74LVC1G123DC-Q100的Datasheet PDF文件第4页浏览型号74LVC1G123DC-Q100的Datasheet PDF文件第5页浏览型号74LVC1G123DC-Q100的Datasheet PDF文件第6页浏览型号74LVC1G123DC-Q100的Datasheet PDF文件第7页 
74LVC1G123-Q100  
Single retriggerable monostable multivibrator;  
Schmitt trigger inputs  
Rev. 3 — 2 November 2018  
Product data sheet  
1. General description  
The 74LVC1G123-Q100 is a single retriggerable monostable multivibrator with Schmitt trigger  
inputs. Output pulse width is controlled by three methods:  
1. The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT).  
2. Once triggered, the basic output pulse width may be extended by retriggering the gated active  
LOW-going edge input (A) or the active HIGH-going edge input (B). By repeating this process,  
the output pulse period (Q = HIGH) can be made as long as desired. Alternatively an output  
delay can be terminated at any time by a LOW-going edge on input CLR, which also inhibits the  
triggering.  
3. An internal connection from CLR to the input gates makes it possible to trigger the circuit by a  
HIGH-going signal at input CLR.  
Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices  
as translators in a mixed 3.3 V and 5 V environment. Schmitt trigger inputs, makes the circuit highly  
tolerant to slower input rise and fall times.  
This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry  
disables the output, preventing the damaging backflow current through the device when it is  
powered down.  
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100  
(Grade 1) and is suitable for use in automotive applications.  
2. Features and benefits  
Automotive product qualification in accordance with AEC-Q100 (Grade 1)  
Specified from -40 °C to +85 °C and from -40 °C to +125 °C  
Wide supply voltage range from 1.65 V to 5.5 V  
High noise immunity  
±24 mA output drive (VCC = 3.0 V)  
CMOS low power consumption  
DC triggered from active HIGH or active LOW inputs  
Retriggerable for very long pulses up to 100 % duty factor  
Direct reset terminates output pulse  
Schmitt trigger on all inputs  
Complies with JEDEC standard:  
JESD8-7 (1.65 V to 1.95 V)  
JESD8-5 (2.3 V to 2.7 V)  
JESD8-B/JESD36 (2.7 V to 3.6 V)  
Power-on-reset on outputs  
Latch-up performance exceeds 100 mA  
Direct interface with TTL levels  
Inputs accept voltages up to 5.5 V  
ESD protection:  
MIL-STD-883, method 3015 exceeds 2000 V  
HBM JESD22-A114F exceeds 2000 V  
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)  
 
 

与74LVC1G123DC-Q100相关器件

型号 品牌 获取价格 描述 数据表
74LVC1G123DCTRE4 TI

获取价格

具有施密特触发输入的单路可再触发单稳态多谐振荡器 | DCT | 8 | -40 to 1
74LVC1G123DCTRG4 TI

获取价格

具有施密特触发输入的单路可再触发单稳态多谐振荡器 | DCT | 8 | -40 to 1
74LVC1G123DCTTE4 TI

获取价格

具有施密特触发输入的单路可再触发单稳态多谐振荡器 | DCT | 8 | -40 to 1
74LVC1G123DCTTG4 TI

获取价格

具有施密特触发输入的单路可再触发单稳态多谐振荡器 | DCT | 8 | -40 to 1
74LVC1G123DCURE4 TI

获取价格

SINGLE RETRIGGERABLE MONOSTABLE MULTIVIBRATOR WITH SCHMITT TRIGGER INPUTS
74LVC1G123DCURG4 TI

获取价格

具有施密特触发输入的单路可再触发单稳态多谐振荡器 | DCU | 8 | -40 to 1
74LVC1G123DCUTE4 TI

获取价格

SINGLE RETRIGGERABLE MONOSTABLE MULTIVIBRATOR WITH SCHMITT TRIGGER INPUTS
74LVC1G123DCUTG4 TI

获取价格

具有施密特触发输入的单路可再触发单稳态多谐振荡器 | DCU | 8 | -40 to 1
74LVC1G123DP NXP

获取价格

Single retriggerable monostable multivibrator
74LVC1G123DP NEXPERIA

获取价格

Single retriggerable monostable multivibrator; Schmitt trigger inputsProduction