74CBTLV3125-Q100
4-bit bus switch
Rev. 3 — 23 October 2019
Product data sheet
1. General description
The 74CBTLV3125-Q100 provides a 4-bit high-speed bus switch with separate output enable
inputs (1OE to 4OE). The low on-state resistance of the switch allows connections to be made with
minimal propagation delay. The switch is disabled (high-impedance OFF-state) when the output
enable (nOE) input is HIGH.
To ensure the high-impedance OFF-state during power-up or power-down, nOE should be tied
to the VCC through a pull-up resistor. The minimum value of the resistor is determined by the
current-sinking capability of the driver.
Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times
across the entire VCC range from 2.3 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry
disables the output, preventing the damaging backflow current through the device when it is
powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100
(Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
•
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
•
•
•
•
•
Supply voltage range from 2.3 V to 3.6 V
Standard ’125’-type pinout
High noise immunity
Complies with JEDEC standard:
•
•
JESD8-5 (2.3 V to 2.7 V)
JESD8-B/JESD36 (2.7 V to 3.6 V)
•
ESD protection:
•
•
•
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F: exceeds 2000 V
CDM AEC-Q100-011 revision B exceeds 1000 V
•
•
•
•
•
5 Ω switch connection between two ports
Rail to rail switching on data I/O ports
CMOS low power consumption
Latch-up performance exceeds 250 mA per JESD78B Class I level A
IOFF circuitry provides partial Power-down mode operation