IDT74ALVCH16903
3.3VCMOS12-BITUNIVERSALBUSDRIVERWITHPARITYCHECKER
INDUSTRIALTEMPERATURERANGE
3.3V CMOS 12-BIT UNIVERSAL
IDT74ALVCH16903
BUS DRIVER WITH PARITY
CHECKER, DUAL 3-STATE
OUTPUTS AND BUS-HOLD
DESCRIPTION:
FEATURES:
This 12-bit universal bus driver is built using advanced dual metal CMOS
technology. This device has dual outputs and can operate as a buffer or an
edge-triggered register. In both modes, parity is checked on APAR, which
arrivesonecycleafterthedatatowhichitapplies.TheYERRoutput,whichis
produced one cycle after APAR, is open drain.
• 0.5 MICRON CMOS Technology
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
• VCC = 3.3V ± 0.3V, Normal Range
• VCC = 2.7V to 3.6V, Extended Range
• VCC = 2.5V ± 0.2V
• CMOS power levels (0.4μ W typ. static)
• Rail-to-Rail output swing for increased noise margin
• Available in TSSOP package
MODE selects one of the two data paths. When MODE is low, the device
operatesasanedge-triggeredregister.Onthepositivetransitionoftheclock
(CLK)inputandwhentheclock-enable(CLKEN)inputislow,datasetupatthe
Ainputsisstoredintheinternalregisters.OnthepositivetransitionofCLKand
when CLKEN is high, only data setup at the 9A-12A inputs is stored in their
internalregisters.WhenMODEishigh,thedeviceoperatesasabufferanddata
attheAinputspassesdirectlytotheoutputs.The11A/YERREN servesadual
purpose;itactsasanormaldatabitandalsoenablesYERRdatatobeclocked
intotheYERRoutputregister.
DRIVE FEATURES:
• High Output Drivers: ±24mA
• Suitable for heavy loads
Whenusedasasingledevice,parityoutputenable(PAROE)mustbetied
high;whenparityinput/output(PARI/O)islow,evenparityisselectedandwhen
PARI/Oishigh,oddparityisselected.WhenusedinpairsandPAROEislow,
theparitysumisoutputonPARI/OforcascadingtothesecondALVCH16903.
WhenusedinpairsandPAROEishigh,PARI/Oacceptsapartialparitysum
fromthefirstALVCH16903.
Abufferedoutput-enable(OE)inputcanbeusedtoplacethe24outputsand
YERRineitheranormallogicstate(highorlowlogiclevels)orahigh-impedance
state.Inthehigh-impedancestate,theoutputsneitherloadnordrivethebuslines
significantly. The high-impedance state and increased drive provide the
capabilitytodrivebuslineswithoutneedforinterfaceorpullupcomponents.
The ALVCH16903 has been designed with a ±24mA output driver. This
driveriscapableofdrivingamoderatetoheavyloadwhilemaintainingspeed
performance.
ABSOLUTEMAXIMUMRATINGS(1)
Symbol
Description
Max
Unit
V
(2)
VTERM
Terminal Voltage with Respect to GND
–0.5 to +4.6
(3)
VTERM
Terminal Voltage with Respect to GND –0.5 to VCC+0.5
(Outputs Only)
V
TSTG
IOUT
IIK
Storage Temperature
DC Output Current
–65 to +150
–50 to +50
±50
° C
mA
mA
Continuous Clamp Current,
VI < 0 or VI > VCC
IOK
Continuous Clamp Current, VO < 0
–50
mA
mA
ICC
ISS
Continuous Current through each
VCC or GND
±100
The ALVCH16903 has “bus-hold” which retains the inputs’ last state
whenevertheinputbusgoestoahigh-impedance.Thispreventsfloatinginputs
andeliminatestheneedforpull-up/downresistors.
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. This value is limited to 4.6V maximum.
APPLICATIONS:
• 3.3V high speed systems
• 3.3V and lower voltage computing systems
CAPACITANCE (TA = +25°C, F = 1.0MHz)
Symbol
Parameter(1)
Conditions
VIN = 0V
VOUT = 0V
VIN = 0V
Typ.
Max. Unit
CIN
Input Capacitance
Output Capacitance
I/O Port Capacitance
5
7
7
7
9
9
pF
pF
pF
COUT
COUT
NOTE:
1. As applicable to the device type.
TheIDTlogoisaregisteredtrademarkofIntegratedDeviceTechnology,Inc.
INDUSTRIAL TEMPERATURE RANGE
JUNE 2006
1
© 2006 Integrated Device Technology, Inc.
DSC-4911/4