6DAW_1.5 Series
6W - Single/Dual Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
DC-DC Converter
6 Watt
Efficiency up to 88%
2:1 wide input voltage range
1.5KVDC input/output
isolation
Operating temperature:
-40°C ~ +85°C
Input under-voltage, over-
current, over-voltage protec-
tion
Meet CISPR32/EN55032 CLASS
A, without extra components
(except for 5VDC input)
The 6DAW_1.5 series are products of 6W output power, wide range of
voltage input of 4.5-9VDC, 9-18VDC, 18-36VDC, 36-75VDC, isolation volta-
ge of 1500VDC, input under-voltage protection, output over-voltage,
over-current, short circuit protection and EMI meets CISPR32/EN55032
CLASS A without external components (except for 5VDC input); these
products are widely used in fields such as industrial control, electric
power, instruments and communication.
Short circuit protection (SCP)
Low ripple & noise
International standard pin-out
EN62368 approved
Common specifications
Short circuit protection:
Cooling:
Output specifications
Continuous, automatic recovery
Free air convection
Item
Test condition
Min Typ
Max
Units
Output voltage
accuracy 1)
5VDC, 0%-100% load
• positive output
• negative output
others, 5%-100% load
• positive output
• negative output
1
1
2
3
%
%
Operation temperature range:
Storage temperature range:
Lead temperature range:
Storage humidity range:
Vibration:
-40°C~+85°C
-55°C ~+125°C
1
1
3
3
%
%
300°C MAX, 1.5mm from case for 10 sec
< 95%
Line regulation
(at full load)
Input voltage low to high
• positive output
• negative output
0.2
0.5
0.5
1
%
%
10-150Hz, 5G, 30 Min. along X, Y and Z
300KHz, PWM mode
Aluminium alloy
Switching frequency:
Case material:
Load regulation 2)
5VDC, 0%-100% load
• positive output
• negative output
others, 5%-100% load
• positive output
• negative output
1
1.5
%
%
MTBF (M1L-HDBK-217F @25°C):
Weight:
>1,000,000 hours
0.5
0.5
1
1.5
%
%
5VDC: 12g / Others: 14g
32.00 × 20.00 × 10.80mm
Dimensions:
Cross regulation
Dual output, primary output
50% loading, auxiliary output
10%-100% loading
5
%
Input specifications
Transient Recovery 25% load step change
Time
300
500
µs
Item
Test condition
Min
Typ
Max
Units
Input current
(full load/no load)
5VDC input
• 5V/ 5V output
• others
12VDC input
• 3.3V output
• others
Transient Response 25% load step change
1538/10 1578/30 mA
1428/10 1463/30 mA
Deviation
• 3.3V, 5V, 5V output
• others
5
3
8
5
%
%
Temperature
coefficient
Full load
0.03
%/°C
550/7
607/7
566/25
641/25
mA
mA
24VDC input
• 3.3V output
• others
48VDC input
• 3.3V output
• others
Ripple&Noise 3)
20MHz Bandwidth
Input voltage range
100
160
mVp-p
%Vo
265/7
296/7
272/25
313/25
mA
mA
Over-voltage
protection
110
110
131/7
147/7
134/25
155/25
mA
mA
Over-current
protection
Input voltage range
140
190
%lo
Reflected Ripple
Current
• 5VDC output
• others
50
20
mA
mA
1) At 0%~5% load, the max. output voltage accuracy of 5VDC output converter is 5%.
2) When testing from 0% to100%load working conditions load regulation index of 5%
3) Ripple & Noise at < 5% load is 5%Vo max. The ”parallel cable” method is used for
Ripple and Noise test.
Surge voltage
(1sec. max.)
• 5VDC input
• 12VDC input
• 24VDC input
• 48VDC input
-0.7
-0.7
-0.7
-0.7
16
VDC
VDC
VDC
VDC
25
50
100
Isolation specifications
Start-up Voltage
• 5VDC input
• 12VDC input
• 24VDC input
• 48VDC input
4.5
9
18
36
VDC
VDC
VDC
VDC
Item
Test condition
Min
Typ
Max
Units
VDC
Isolation voltage
Tested for 1 minute
and 1mA max
1500
Isolation resistance
Test at 500VDC
1000
MΩ
pF
Under-voltage
protection
• 5VDC input
• 12VDC input
• 24VDC input
• 48VDC input
3
3.5
6.5
15
VDC
VDC
VDC
VDC
5.5
13
26
Isolation capacitance
Input-output,
100KHz/0.1V
1000
30
Input filter
Hot plug
Pi filter
Example:
Unavailable
6DAW_2405D1.5
6= 6Watt; D= DIP; A= series; W= wide input (2:1) 18-36Vin; 5Vout;
D= Dual Output; 1.5= 1500VDC
Page 1 of 5
6DAW_1.5 – Rev. 2019-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com