5ACDM Series
5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
AC-DC Converter
5 Watt
Wide input voltage range:
90~264VAC/120~370VDC
Short circuit protection (SCP)
Overload, over-voltage
protection
High safety isolation 3000VAC The 5ACDM series is a high efficiency green power modules provided by
Ultra-slim SIP package
Industrial grade
GAPTEC. The features of this series are: Accept either AC or DC
input, wide input voltage, high efficiency, low power consumption, safety
isolation etc. All models are particularly suitable for the applications such
as industrial, electric power, instrumentation, smart home which do not
have high requirement on EMC. EMC application circuit (EMC reference
EN55032) must be added if the products need to be applied to EMC harsh
environment.
Meets UL/IEC/EN 60950-1,
UL/IEC/EN 62368-1
EMI EN55022, CLASS B
High efficiency up to 85%
UL-62368-1 (E347551)
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous, automatic recovery
25°C TYP
Item
Test condition
Min Typ
Max
Units
Output voltage
accuracy
• 3.3V/5V output
• Others
3
2
%
%
Free air convection
-25°C – +70°C
Min. load
0
%
Operation temperature range:
Storage temperature range:
Welding temperature:
Line regulation
Load regulation
Temperature drift
Ripple & Noise*
Io nom,Vi min…Vi max
1
1
%
-40°C – +85°C
%
Wave-soldering: 250 10°C; time:5ꢀ10s
Manual-welding: 360 10°C; time:3ꢀ5s
100% full load
0.05
%/°C
mV
µs
20MHz Bandwidth
480
65
Storage humidity range:
Safety standard:
< 95%
Transient response
setting time
Vi nom, Io nom
= ←→0.5 Io nom
1000
Design refer to UL60950-1, IEC60950-1
Design refer to EN55022, CLASS B
Design refer to EN61000
Unavailable
EMI Conduction & Radiation:
EMS Immunity:
Switching
frequency
Full load, nominal input
KHz
Hot plug:
Over-load
Protection
≥ 110% rated output power,
Recovers automatically after
fault condition is removed
Case material:
Plastic [UL94-V0]
MTBF (MIL-HDBK-217F@25°C):
Dimensions (LxWxH):
Weight:
>328,000 hours, Ground Benign
25.4x25.4x16.1 mm
Over-voltage
Protection
Zener clamp diode, 120%-150%
rated output Vvoltage
20g
*
Ripple & noise is measured by using 20 MHz bandwidth, measured with a 10uf
paralleled with a high-frequency 0.47uf capacitor across each output by full load.
Input specifications
Item
Test condition
Min
Typ
Max
Units
Example:
5ACDM_05S3
Input voltage range • AC Input
• DC Input
90
120
264
370
VAC
VDC
5 = 5Watt; AC = AC-DC; DM = case style; 05 = 5Vout; S = Single
Output;
Input frequency
47
50/60 63
Hz
Input fuse
VDE/UL/CCC FUSE 2.5A/250V (Slow blow)
Note:
Inrush current
• 115VAC
• 230VAC
10
20
A
A
1. Module required dispensing fixed after assembled;
2. All specifications were measured at Ta = 25°C, humidity <75%, nominal input
voltage and rated output load unless otherwise specified;
3. All index testing methods in this datasheet are based on our Company’s
corporate standards;
4. The performance indexes of the product models listed in this manual are as
above, but some indexes of non-standard model products will exceed the above-
mentioned requirements, and please directly contact our technician for specific
information;
5. We can provide product customization service;
6. Specifications of this product are subject to changes without prior notice.
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VAC
Isolation voltage
Input/Output,
5mA/5sec
3000
Isolation resistance
Input/Output,
@500 Vdc
100
MΩ
Page 1 of 3
5ACDM – Rev. 2020-1.4
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com