3mm Round
® OptopipeTM
Optical Light Pipe, 2 Array
515-1071
12.70
[.50]
Recommended
MicroLED SMT LEDs
for use with 515-1071
12.95
6.35
[.250]
[.51]
3.56
[.140]
2 PLCS
C
L
LED
1.78
[.070]
C
L
LED
2
4.19
[.165]
2.39
[.094]
PART NO.
597-3111-4xx
597-3201-4xx
597-3311-4xx
597-3401-4xx
COLOR
AlGaAs Red
Orange
PAGE #
1-28
Ø 3.56
[.140]
2 PLCS
3.56
[.14]
3.17
1-28
Ø 2.01
[.125]
[.079]
TYP
Green
1-28
4.32
[.17]
6.35
[.250]
2 PLCS
Yellow
1-28
1.70
[.067]
TYP
1.52
[.060]
TYP
1.48
[.057]
TYP
NOTE: designed for
post-reflow
PC board insertion.
1.35
[.053]
DIRECTION
OF LIGHT
2.34
[.092]
Ø .076 ±.002
TYP: 2 PLCS
6.35 ±.08
[.250 ±.003]
Dimensions in mm [inches]
8.69
[.342]
LED Data
Features
For absolute maximum ratings and other
electrical and optical data on the recommended
LEDs, refer to LED data sheets.
• Compatible with Dialight’s 515-1020 and 515-1069
Optopipe Light Pipe arrays
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
Operating/Storage Temperature
–30°C to +100°C
• Arrays reduce insertion costs
• Secures to PCB by press-fit
Dialight Optopipe Light Pipe Description
This Optopipe’s™ circular light emitting surfaces appear bright and uniform in intensity. It is reliably held in place by 2
press-fit pins located on the right side of each of the 2 light pipe elements. This Optopipe™ functions as a through-the-
case indicator with a textured finish on the 2 light emitting surface that increases its viewing angle. The recommended
light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The LEDs are mounted in a straight line on a
0.250" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen
index.
Dialight can provide custom Optopipe™ solutions for your applications.
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
2-35