5秒后页面跳转
45LM58D PDF预览

45LM58D

更新时间: 2024-09-17 01:16:51
品牌 Logo 应用领域
邦纳 - BANNER /
页数 文件大小 规格书
6页 1934K
描述
45LM Series Modules

45LM58D 数据手册

 浏览型号45LM58D的Datasheet PDF文件第2页浏览型号45LM58D的Datasheet PDF文件第3页浏览型号45LM58D的Datasheet PDF文件第4页浏览型号45LM58D的Datasheet PDF文件第5页浏览型号45LM58D的Datasheet PDF文件第6页 
45LM Series Modules  
Plug-in Logic and Display Modules for Q45 Series Photoelectric Sensors  
Features  
• Three plug-in modules are available:  
Model  
Functions  
45LM58  
45LM58D  
45LMD  
Selectable output timing  
Selectable output timing, plus signal strength display  
Signal strength display, only (no programmable functions)  
• Models with selectable output timing offer the following timing logic functions (see  
page 2 or 3 for descriptions):  
- ON-delay  
- ON-delayed one-shot  
- Repeat cycle timer  
- Limit timer  
- OFF-delay  
- ON- and OFF-delay  
- Retriggerable one-shot  
- Non-retriggerable one-shot  
- Delayed one-shot  
- Rate sensor  
- Flip-flop (alternate action)  
• Selectable timing ranges:  
0.01 to 0.15 seconds  
0.1 to 1.5 seconds  
1 to 15 seconds  
• Delay and hold time ranges may be individually selected, and times precisely set,  
using 15-turn adjustment potentiometers. Delay or hold time may also be disabled  
(zero seconds).  
• Module allows sensor output to be set for normally-open or normally-closed  
operation  
• Models with signal strength display give a precise indication of excess gain; see  
page 4 for more information. Valuable for sensor setup and alignment, for critical  
evaluation of alternative sensing schemes, and for close monitoring of sensing  
performance over time (e. g., dirt build-up on lenses or progressive misalignment).  
Specifications  
-40° to +70°C (-40° to +158°F)  
Operating Temperature  
Timing Adjustments  
Models 45LM58.. only: Two 15-turn clutched potentiometers with brass elements, accessible from  
outside at the top of sensor, beneath an o-ring sealed polycarbonate cover.  
Models 45LM58.. only: Plus or minus 2% of the timing range (maximum); assumes conditions of  
Timing Repeatability  
Useful Time Range  
Response Time  
LED Display  
constant temperature and power supply.  
Models 45LM58.. only: Useful time range is from maximum time down to 5% of maximum. When the  
timing potentiometer is set fully counterclockwise, time will be approximately 5%  
of maximum.  
Models 45LM58.. only: When the delay time is switched OFF, the card adds no measurable sensing  
response time.  
Models 45LM..D only: Seven-element LED display, visible through transparent top sensor cover. The  
more LEDs that are lit, the stronger is the received light signal; three LEDs lit is  
equivalent to an excess gain of about 1x (see page 4).  
Printed in USA  
Jan 2013
p/n 63416 Rev. B  

与45LM58D相关器件

型号 品牌 获取价格 描述 数据表
45LR NJSEMI

获取价格

Standard Recovery Diodes (Stud Version), 150 A
45LR VISHAY

获取价格

Standard Recovery Diodes (Stud Version), 150 A
45LR_12 VISHAY

获取价格

Standard Recovery Diodes (Stud Version), 150 A
45LR_13 NJSEMI

获取价格

STANDARD RECOVERY DIODES
45LR10 NAINA

获取价格

SILICON POWER DIODE
45LR10 VISHAY

获取价格

Standard Recovery Diodes (Stud Version), 150 A
45LR10 INFINEON

获取价格

STANDARD RECOVERY DIODES Stud Version
45LR10 NJSEMI

获取价格

Standard Recovery Diodes (Stud Version), 150 A
45LR100 NAINA

获取价格

SILICON POWER DIODE
45LR100 NJSEMI

获取价格

Diode Switching 1KV 150A