30KPA28A thru 30KPA288CA, e3
30kW Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
FOR
DESCRIPTION
APPEARANCE
These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are
designed for applications requiring protection of voltage-sensitive electronic
devices that may be damaged by harsh or severe voltage transients
including lightning per IEC61000-4-5 and class levels with various source
impedances described herein. This series is available in 33 to 400 volt
standoff voltages (VWM) in both unidirectional and bi-directional with either
5% or 10% tolerances of the Breakdown Voltage (VBR). Microsemi also
offers numerous other TVS products to meet higher or lower power
demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES @ 250C UNLESS OTHER WISE SPECIFIED
APPLICATIONS / BENEFITS
•
•
•
Available in both Unidirectional and Bidirectional
construction (Bidirectional with a CA suffix)
•
•
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and
IEC 61000-4-4
Suppresses transients up to 30 kW @ 10/1000 µs and
200 kW @ 8/20 µs (see Figure 1)
•
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1,2,3,4: 30KPA33A - 30KPA400A or CA
Class 5: 30KPA33A - 30KPA400A or CA
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
•
•
Glass passivated chip junction in a P600 package
Reverse leakage below 2 µA for voltages above 73
volts VBR
Class 5: 30KPA33A - 30KPA220A or CA (long
distance)
• Optional 100% screening for avionics grade is
available by adding MA prefix to part number for
added 100% temperature cycle -55oC to +125oC (10X)
as well as surge (3X) and 24 hours HTRB with post
test VZ & IR (in the operating direction for unidirectional
or both directions for bidirectional)
•
•
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1,2, 3: 30KPA33A to 30KPA400A or CA
Class 4: 30KPA33A to 30KPA220A or CA
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
• Options for screening in accordance with MIL-PRF-
19500 for JANTX are available by adding MX prefix to
the part number.
Class 2: 30KPA33A to 30KPA400A or CA
Class 3: 30KPA33A to 30KPA220A or CA
Class 4: 30KPA33A to 30KPA110A or CA
RoHS Compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
Peak Pulse Power dissipation at 25ºC: 30,000 watts
•
•
CASE: Void-free transfer molded thermosetting
epoxy P600 package meeting UL94V-0
at 10/1000 μs (also see Figures 1 and 2)
•
•
Impulse repetition rate (duty factor): 0.05%
FINISH: Tin-Lead or RoHS compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
t
clamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating & Storage temperature: -65ºC to +150ºC
•
MARKING:
•
•
Thermal resistance: 17.5ºC/W junction to lead, or
77.5ºC/W junction to ambient when mounted on FR4
PC board with 4 mm2 copper pads (1oz) and track
width 1 mm, length 25 mm
¾
¾
¾
¾
Polarity band when required
MSC Microsemi
Part Number 30KPAXX
WW/YY Date code
•
Steady-State Power dissipation: 7 watts at TL =
27.5oC, or 1.61 watts at TA = 25ºC when mounted on
FR4 PC board described for thermal resistance
•
POLARITY: Band denotes cathode. Bidirectional not
marked for polarity
•
•
WEIGHT: 0.07oz or 2.5grams (approximate)
•
•
Forward Surge: 400 Amps 8.3 ms half-sine wave for
unidirectional devices only
Solder temperatures: 260 ºC for 10 s (maximum)
TAPE & REEL option: Standard per EIA-296 for axial
package (add “TR” suffix to part number)
•
See package dimension on last page
Copyright © 2009
09-01-2009 REV A, SD89A
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503