TVS Diodes
Axial Leaded – 30000W > 30KPA-HR series
Pb e3
RoHS
30KPA-HR Series
Descriptios
The 30KPA-HR High Reliability Series is designed
Uni-directional
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events.
Features
Bi-directional
• 30000W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in P600 package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
• Typical IR less than 2μA
when VBR min>73V
• High temperature
soldering guaranteed:
260C/10 seconds / 0.375”,
(9.5mm) lead length, 5
lbs., (2.3kg) tension
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• Lead-free matte tin plated
package
• Halogen free and RoHS
compliant
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
PPPM
Value
Unit
W
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.2)
(Note 1)
30000
30kV(Air), 30kV (Contact)
• Pb-free E3 means 2nd
level interconnect is Pb-
free and the terminal finish
material is tin(Sn) (IPC/
JEDEC J-STD-609A.01)
Steady State Power Dissipation on
Infinite Heat Sink atTL=75ºC
PD
8.0
W
A
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
IFSM
400
Operating Junction and Storage
Temperature Range
TJ, TSTG -55 to 175
°C
TypicalThermal Resistance Junction
to Lead
RuJL
RuJA
8.0
40
°C/W
°C/W
• Low incremental surge
resistance
TypicalThermal Resistance Junction
to Ambient
Notes:
1. For RTCA/DO-160G testing results, please see tables in the last section of this
Notes:
datasheet
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Functional Diagram
Bi-directional
Cathode
Anode
Uni-directional
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/10/16