General Purpose Relays
Product Sets
SCHRACK
Relay Package SNR
n
Relay package consisting of DIN-rail socket and relay
nꢀ
nꢀ
nꢀ
1 CO with 6 A rated load
Module width only 6.2 mm
Reduced system width for increased packing density
on the DIN rail
Approvals
Relay: VDE Cert. No. 40010063, cULus E214025, cCSAus 2148326
F0260-BS
Socket: VDE Cert. No. 40010063, cULus E224918
Technical data of approved types on request
Z b
Contact data
Contact configuration
Contact set
1 CO
single contact
micro disconnection
240/400 VAC
6 A
Type of interruption
Rated voltage/max. switching voltage AC
Rated current
Maximum breaking capacity AC
Limiting breaking capacity,
max. 4 s, duty factor 10%
Contact material
1500 VA
10 A
AgSnO2
100mA, 12V
AgSnO2
gold plated
50mW
Minimum contact load
Rated frequency of operation
with/without load
6 / 1200 min-1
Operate-/release time
Bounce time NO/NC contact
max 12 / 5 ms
max 3 / 8 ms
Contact ratings
For contact ratings see datasheet
Slim Interface Relay SNR
Input data
Rated input voltage DC
Operative range to IEC 61810
12, 24 VDC, 115, 230 VAC/VDC*)
2
*) Version 115, 230 VAC/VDC equipped with 60 VDC relay
Insulation
Dielectric strength
coil-contact circuit
4000 Vrms
Coil versions, DC coil
open contact circuit
1000 Vrms
≥ 6 / 8 mm
IIIa
Coil
code
Rated
voltage
VDC
12
Operate
voltage
VDC
8.4
16.8
Release
voltage
VDC
0.6
1.2
Coil
resistance
Ω 10%
848
Rated coil
power
mW
Clearance / creepage coil-contact circuit
Material group of insulation parts
Insulation to IEC 60664-1
Type of insulation coil-contact circuit
open contact circuit
Rated insulation voltage
Pollution degree
LB2
LC4
184
220
reinforced
micro disconnection
250 V
24
3390
Coil versions, AC coil 50 Hz
Coil
code
Rated
voltage
Operate
voltage
50 Hz
VAC
82.0
160.0
Release
voltage
50 Hz
VAC
9.0
15.0
Coil
resistance
Rated coil
power
50 Hz
mVA
3
2
Rated voltage system
Overvoltage category
240 V
230 / 400 V
III
VAC
115
230
Ω
SM5
TP0
not applicable
not applicable
403
736
Other coil voltages on request.
1
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.