MODEL: 27HU
Head-mounted Two-wire Signal Conditioners
27-UNIT
RELATED PRODUCTS
• USB interface Bell202 modem (model: COP-HU)
Usable in ‘non-hazardous’ area only.
• Hand-held communicator
2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
(HART communication)
• PC configurator software (model: 27HUCFG)
Downloadable at M-System’s web site.
Functions & Features
• Universal input: DC mV, T/C, RTD and resistance
• High accuracy
GENERAL SPECIFICATIONS
Construction: Sensor head-mounting
Connection: M3 screw terminals (torque 0.5 N·m)
Screw terminal: Nickel-plated brass
Housing material: Flame-resistant resin (black)
Isolation: Input to output
• HART communication
• Intrinsically safe approval
• Suitable for Functional Safety applications up to SIL2
• Programming via hand-held communicator or via PC
• A wide variety of T/C and RTD types
• User’s temperature table can be used
• Self diagnostics
User-configurable items:
• Input sensor type and numbers
• Number of wires (RTD & resistance)
• Input range (inverted range selectable)
• Burnout
• Ultra-low temp. drift option (20 ppm/°C typ.)
• CE marking (conforms to ATEX and EMC)
• Output limits (Upper / Lower)
• Damping time (factory set to 0)
• Cold junction compensation (T/C; internal or external
sensor selectable)
44 (1.73) DIA.
• Linearization
20.7
(.81)
• Sensor calibration
• Output calibration
mm (inch)
• HART communication mode
Refer to the HART setup manual or the PC configurator
users manual for the detail.
MODEL: 27HU–[1][2]
HART COMMUNICATION
Protocol: HART communication protocol
HART address range: 0 – 15 (factory set to 0)
Transmission speed: 1200 bps
ORDERING INFORMATION
• Code number: 27HU-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. 27HU-2/L)
Digital current: Approx. 1 mAp-p when communicating
Character format: 1 Start Bit, 8 Data Bits, 1 Odd Parity Bit,
1 Stop Bit
Use Ordering Information Sheet (No. ESU-7651). Factory
standard setting will be used if not otherwise specified.
Specify the country in which the product is to be used with
the Safety Approval code 2.
Distance: 1.5 km (0.9 miles)
HART communication mode: Master-Slave Mode and Burst
Mode (factory set to Master-Slave)
HART network mode: Point-to-Point Mode and Multi-drop
Mode; automatically set to Multi-drop Mode when the
address is set to other than 0.
[1] SAFETY APPROVAL
0: None
1: FM intrinsically safe
2: ATEX intrinsic safety
INPUT SPECIFICATIONS
The input is factory set for use with K thermocouple, single
input, 0 to 100°C, internal CJC sensor.
See Table 1 for the available input type, the minimum span
and the maximum range.
[2] OPTIONS
Temperature Drift
Blank: Standard (temp. coefficient 0.015%/°C)
/L: Ultra-low temperature drift
■ DC mV (dual input available)
Input resistance: ≥ 1 MΩ
(temp. coefficient 0.002%/°C typ., 0.005%/°C max.)
■ Thermocouple (dual input available)
27HU SPECIFICATIONS
ES-7651 Rev.17 Page 1/5
http://www.m-system.co.jp/