25AA1024
1 Mbit SPI Bus Serial EEPROM
Device Selection Table
Part Number
25AA1024
VCC Range
Page Size
Temp. Ranges
Packages
1.8-5.5V
256 Byte
I
P, SM, MF
Features
Description
• 20 MHz Maximum Clock Speed
• Byte and Page-level Write Operations:
- 256 byte page
- 6 ms maximum write cycle time
- No page or sector erase required
• Low-Power CMOS Technology:
- Maximum Write current: 7 mA at 5.5V
- Maximum Read current: 10 mA at 5.5V,
20 MHz
- Standby current: 1 µA at 2.5V, 85°C
(Deep Power-down)
The Microchip Technology Inc. 25AA1024 is a
1024 Kbit serial EEPROM memory with byte-level and
page-level serial EEPROM functions. It also features
Page, Sector and Chip erase functions typically
associated with Flash-based products. These functions
are not required for byte or page write operations. The
memory is accessed via a simple Serial Peripheral
Interface (SPI) compatible serial bus. The bus signals
required are a clock input (SCK) plus separate data in
(SI) and data out (SO) lines. Access to the device is
controlled by a Chip Select (CS) input.
• Electronic Signature for Device ID
• Self-Timed Erase and Write Cycles:
- Page Erase (6 ms maximum)
- Sector Erase (10 ms maximum)
- Chip Erase (10 ms maximum)
• Sector Write Protection (32K byte/sector):
- Protect none, 1/4, 1/2 or all of array
• Built-in Write Protection:
Communication to the device can be paused via the
hold pin (HOLD). While the device is paused,
transitions on its inputs will be ignored, with the
exception of Chip Select, allowing the host to service
higher priority interrupts.
The 25AA1024 is available in standard packages
including 8-lead PDIP and SOIJ, and advanced 8-lead
DFN package. All devices are RoHS compliant.
- Power-on/off data protection circuitry
- Write enable latch
Package Types (not to scale)
- Write-protect pin
• High Reliability:
- Endurance: 1M erase/write cycles
- Data Retention: >200 years
- ESD Protection: 4000V
• Temperature Ranges Supported:
- Industrial (I):-40°C to +85°C
• RoHS Compliant
DFN
PDIP/SOIJ
(MF)
(P, SM)
1
2
3
4
CS
SO
8
7
6
5
VCC
HOLD
SCK
SI
CS
SO
VCC
1
2
3
4
8
7
6
5
HOLD
WP
VSS
WP
VSS
SCK
SI
Pin Function Table
Name
Function
CS
Chip Select Input
SO
WP
VSS
SI
Serial Data Output
Write-Protect
Ground
Serial Data Input
Serial Clock Input
Hold Input
SCK
HOLD
VCC
Supply Voltage
2007-2015 Microchip Technology Inc.
DS20001836J-page 1