Datasheet > 1213565--1

1213565--1

更新时间： 2024-09-19 01:14:47

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
5页	112K
描述
Double Action Hand Tool

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

1213565--1 数据手册

Instruction Sheet

Double Action Hand Tool (DAHT)

Adapter Assembly 1213563-1

408-4485

17 MAR 10 Rev B

(For Use With 626 Pneumatic Tooling Assemblies)

Setscrew

Typical DAHT

Crimp Head (Ref)

Mounting Holes

Clevis

Adapter Cavity

Adapter

Cam

Adapter Assembly

Quick Pins

(Supplied with

Adapter Assembly)

Clevis

Figure 1

Read these instructions thoroughly before

proceeding.

1. INTRODUCTION

DAHT Adapter Assembly 1213563--1 is designed to

accept the crimp head from any DAHT to adapt the

crimp head for use with 626 pneumatic tooling

assemblies. DAHTs are available from Tyco

Electronics. For information concerning the setup and

operation of the pneumatic tool, refer to Customer

Manual 409--5862.

Dimensions are in millimeters [with inch

equivalents in brackets]. Figures and illustrations

are for identification only and are not drawn to

scale.

NOTE

Reasons for reissue of this instruction sheet are

provided in Section 6, REVISION SUMMARY.

This instruction sheet provides:

2. DESCRIPTION

— recommended procedures for crimp head

removal from the hand tool

The adapter assembly facilitates the connection of the

crimp head (typical shown in Figure 1) to the

— crimp head installation into the adapter

pneumatic tool and provides the necessary motion of

the crimp head jaws when the pneumatic tool is

actuated. When the tool is actuated, the cam extends

into the adapter, contacting the crimp head jaws.

When the cam retracts, the force is removed from the

jaws and they return to their starting position.

— installation and removal of the cam and adapter

from the pneumatic tool

— maintenance, inspection, and repair information

for the adapter

The jaws may be opened and closed manually by

simultaneously squeezing the two opposing clevises,

which are coupled to the jaws. The quick pins secure

the crimp head to the adapter.

For wire preparation and crimping procedure, and

crimp head maintenance, inspection, and repair, refer

to the associated instruction sheet.

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

E2010 Tyco Electronics Corporation, Berwyn, PA

1 of 5

TE logo and Tyco Electronics are trademarks.

LOC B

*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.

12 3 4 5

中文翻译

下载PDF

与1213565--1相关器件

型号	品牌	获取价格	描述	数据表
1213566--1	MACOM	获取价格	Double Action Hand Tool
1213667-1	TE	获取价格	Seating Tool Assembly
1213668-1	TE	获取价格	Seating Tool Assembly
1213669-1	TE	获取价格	Seating Tool Assembly
12136AF	HITACHI	获取价格	Dolby B-Type Noise Reduction System
121-37-9	WINCHESTER	获取价格	RF TNC Connector, Female, Panel Mount, Cable Mount, Crimp Terminal, Jack
121-38.4K-12.5-20R	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 0.0384MHz Nom,
1213801	SICK	获取价格	MEASURING AUTOMATION LIGHT GRIDS
1-213826-0	TE	获取价格	RECEPTACLE ASSEMBLY, POSTED, REVERSE SEX, SERIES 1, 17-9, CPC
1-213826-1	TE	获取价格	RECEPTACLE ASSEMBLY, POSTED, REVERSE SEX, SERIES 1, 17-9, CPC