Digital Attenuator, 1 Bit, 10 dB Step, DC - 2.0 GHz
AT-266
AT-266
Digital Attenuator, 1 Bit, 10 dB Step
DC - 2.0 GHz
SOT-25 Plastic Package
Features
•
•
•
Single 10 dB Step
Low Loss 0.3dB Typ. @ 900 MHz
Low Cost Plastic SOT25 Package
.114 ± .008
2,9 ± 0,2
.075 ± .008
1,90 ± 0,2
+ .008
.043
- .004
+ 0,2
- 0,1
1,10
Description
M/A-COM’s AT-266 is a 1 bit, 10 dB step GaAs MMIC Digital
Attenuator in a low cost SOT-25 surface mount plastic package.
The AT-266 is ideally suited for use where high accuracy, very
low power consumption and low intermodulation products are
required. Typical applications include radio, wireless LANs,
GPS equipment and other gain/level control circuits.
.110 ± .008
2,80 ± 0,2
.063 ± .004
1,6 ± 0,1
.008 MIN
0,20 MIN
Pin 1
+ .004
.006
0,15
- .002
+ 0,1
- 0,05
.002 ± .002
0,05 ± 0,05
+ .004
The AT-266 is a GaAs MMIC using a mature 1 micron process.
The process features full chip passivation for increased perfor-
mance and reliability.
.031
0,80
- .007
+ 0,1
- 0,18
+ .004
- .002
+ 0,1
.016
0,40
- 0,05
Truth Table
MODE (Control)
Postive1
Pin Configuration
V1
V2
Atten.
PIN No.
Function
Description
RF11
GND1
RF In/Out
0 ± 0.2V
+3 to +8V
0 ± 0.2V
10 dB
IL
1
2
+3 to +8V
RF Ground
Postive / Negative1,2
Negative3
-VC ± 0.2 V
+ VC
+VC
10 dB
IL
3
4
5
RF21
RF In/Out
-VC ± 0.2V
V1
Control Voltage
Control Voltage
0 ± 0.2V
-3V to -8V
0 ± 0.2V
IL
V2
-3V to -8V
10 dB
1. External DC blocking capactors are required as noted1
2. | -VC | + VC ≤ 8 V.
3. If negative control is used, DC blocking capacitors are not
required on RF Ports.
1. Series Capacitors on PINs1, 3 and 5, Shunt Capacitor on PIN 2
are required for Postive Control. 39pF capacitors used for pos-
tive control performance curves.
Electrical Specifications TA = 25°C1
Parameter
Insertion Loss
Test Conditions
Units
dB
Min.
Typ.
0.3
0.5
10
Max.
0.45
0.7
0 - 1 GHz
Insertion Loss
Attenuation
1 - 2 GHz
dB
0 - 1 GHz
dB
±0.4
±0.5
1.5:1
1 - 2 GHz
dB
10
VSWR
IP3
0 - 2 GHz
1.4:1
50
2 Tone @ 0 dBm, 5 MHz spacing
1 GHz
dBm
dBm
ns
42
23
P1dB
28
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
5
20
25
10
Trise, Tfall
Ton, Toff
Transients
ns
10
mV
6
V2.00
1. All measurements at 1.0 GHz, -3 Volts control unless otherwise specified.
M/A-COM Division of AMP Incorporated Q North America: Tel. (800) 366-2266, Fax (800) 618-8883 Q Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087
Q Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.