10DCPW_4 series
10Watt - Single Output DC-DC Converter -
Ultra Wide Input Range - High Isolated & Regulated
DC-DC Converter
10 Watt
The 10DCPW_4 series is a 200-1500 VDC ultra wide input voltage regulated DC-
DC converter, which has advantages such as high efficiency, high reliability and
high safety isolation. The series products are widely used in industries such as
Ultra-wide input voltage
range: 200 ~ 1500VDC
Operating temperature:
-40°C ~ 70°C
Input under voltage, over
voltage, reverse voltage and
over current protection
High reliability, long life,
3 years warranty
photovoltaic power generation and high voltage frequency conversion,
pro-
vide a stable operating voltage for the load device, Its multiple protection fea-
tures can enhance the safety performance of the module power supply and the
load under abnormal working conditions.
4000VAC isolation voltage
High efficiency
UL 1741/CSA-C22.2
No.107.1, EN62109 approval
(pending)
Low ripple & noise
Short circuit protection (SCP)
DIN-Rail package products
Built-in high-voltage fuse
RoHS and EMC filter module
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous, automatic recovery
25°C MAX (Ta= 25°C, 100% load)
Free air convection
-40°C~+70°C
Item
Test condition
Min
Typ
2
Max
300
Units
%
Output voltage
accuracy
Line regulation
Load regulation
Ripple & Noise*
Full load
1
1
%
Operation temperature range:
Storage temperature range:
Case temperature:
0%-100% load
20MHz Bandwidth
%
-40°C ~+85°C
150
mV
90°C MAX
Over current pro-
tection
120%~320%Io,
self-recovery
Welding temperature:
Wave-soldering: 260 5°Cꢀ time:5~10s
Manual-welding: 360 10°Cꢀ time:3~5s
Over voltage
protection
• 5V output voltage
• (Feedback-clamp)
Voltage limited < 8V
• (Feedback-clamp)
Voltage limited < 20V
• (Feedback-clamp)
Voltage limited < 30V
Power derating:
+50°C~+70°C:
10DCPW/15DCPW: 1.5%/°C MIN
40DCPW: 2.5%/°C MIN
• 12V/15V output
voltage
• 24V output voltage
-40°C~0°C:
10DCPW/15DCPW: 0.75%/°C MIN
15DCPW_24S4/40DCPW: 1.5%/°C MIN
Min. load
0%-100% load
200~1500VDC
0
%
s
Case Material Grade:
Black flame-retardant and heat-
resistant plastic (UL94-V0)
Delay time**
2
Switching frequency:
Storage humidity range:
Temperature coefficient:
MTBF (MIL-HDBK-217F@25°C):
Weight:
65kHz
* Test ripple and noise by “parallel cable” method. Test efficiency at normal
temperature and input voltage is 200VDC.
** Delay Time test condition: Full input voltage range, full output load range
(The cooling time between Input power-off and the next input Power-on is
bigger than 15s).
< 95%
0.02%/°C MAX
>300,000 hours
10W/15W output:300g
40W output:410g
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VAC
MΩ
Isolation voltage
Tested for 1 minute
4000
100
Input specifications
Isolation resistance Test at 500VDC
Item
Test condition
Min
200
Typ
Max
Units
VDC
Input voltage range
Input current
1500
200VDC input
• 10W/15W output
• 40W output
Example:
10DCPW_05S4
120
320
mA
mA
10 = 10Watt; DC = DIP Case; P = Photovoltaik; W = Wide input;
05 = 5Vout; S = Single output; 4 = 4kVAC isolation
800VDC input
• 10W/15W output
• 40W output
30
80
mA
mA
1500VDC input
• 10W/15W output
• 40W output
16
42
mA
mA
Inrush current
• 200VDC
• 800VDC
• 1500VDC
30
80
150
A
A
A
Under-voltage
protection
Under voltage protection range: 170~185V
Under voltage release range:180~195V
External input fuse
Hot plug
15A/1500VDC
Unavailable
Page 1 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10DCPW_4 – Rev. 2020-1.4
Specifications subject to change without notice.