Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1341-1
Shielded Power Inductors XEL3530
• AEC-Q200 Grade 1 qualified
• Extremely low DCR and ultra low AC losses for high switching
frequencies (2 to 5 MHz)
• Superior current handling with soft saturation characteristics
• Can withstand high current spike
Designer’s Kit C465 contains 3 each of all values of the XEL3515,
XEL3520 and XEL3530 series
Core material Composite
Environment RoHS compliant, halogen free
Terminations RoHS compliant, tin-silver over copper.
Weight 0.15 – 0.17 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise).
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (A)5
Irms (A)6
±0°C rise 40°C rise
Inductance2
±±0ꢀ (ꢁµ)
SRF typ4
(Mµz)
Part number1
typ
max
10ꢀ drop ±0ꢀ drop 30ꢀ drop
XEL3530-231ME_
XEL3530-301ME_
XEL3530-401ME_
XEL3530-501ME_
XEL3530-681ME_
0.23
0.30
0.40
0.50
0.68
4.20
5.20
6.10
7.20
4.85
6.00
7.10
8.35
11.85
211
173
149
129
110
5.2
4.5
4.0
3.7
2.9
7.8
7.0
6.2
5.8
4.4
10.6
9.2
8.3
7.9
6.2
12.6
11.3
9.1
8.5
7.0
17.2
15.3
12.7
11.4
9.2
10.3
XEL3530-901ME_
XEL3530-122ME_
0.90
1.2
12.7
17.8
14.6
20.5
95
79
2.8
2.5
4.2
3.8
5.9
5.2
5.9
4.2
8.4
6.0
1. When ordering, please specify packaging code:
XEL3530-901MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape 500 parts per full reel).
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
2500 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1341-1 Revised 10/09/17
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.