Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1523-1
XEL4012V
High Voltage Shielded Power Inductors XEL4014V
Halogen
Free
• Extremely low DCR and ultra low AC losses for high switching
frequencies (2 to 5 MHz)
• Superior current handling with soft saturation characteristics
• Can withstand high current spikes
• High-voltage rating of 120 V—50% higher than the standard
series. Learn more about Voltage Ratings for Inductors
• AEC-200 Grade 1 (–40°C to +125°C)
AEC
+
Q200 125°C
Core material Composite
Environment RoHS compliant, halogen free
Terminations RoHS compliant, tin-silver over copper.
Weight 0.11 g
Operating voltage: 0 – 120 V
Ambient temperature –40°C to +125°C with (40°C) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
20°C rise 40°C rise
Inductance2
(nH)
SRF typ4
(MHz)
Isat5
(A)
Irms Testing
Part number1
typ
max
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XEL4012V-920NE_
XEL4012V-221NE_
92 30%
220 30%
5.2
9.7
5.7
10.6
279
146
24.0
16.0
11.5
6.5
16.5
9.0
XEL4014V-221ME_
XEL4014V-331ME_
XEL4014V-561ME_
XEL4014V-781ME_
220 20%
330 20%
560 20%
780 20%
7.5
9.9
16.5
20.3
9.5
12.0
18.4
22.8
150
110
80
18.2
14.6
11.6
9.8
9.0
6.5
5.5
5.0
12.0
9.0
7.5
6.5
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should
be verified in application
conditions.
70
1. When ordering, please specify packaging code:
XEL4014V-781MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel
available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(4000 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1523-1 Revised 11/23/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.