XC6194 Series
1A Output Current Push Button Smart Load Switch
ETR33013-002
■FEATURES
Input Voltage Range
Stand-by Current
■GENERAL DESCRIPTION
:
:
:
:
:
:
1.8V ~ 6.0V
The XC6194 series are the Push Button load switch with
functions best suitable for battery operated devices.
0.001μA (TYP.) / Turn-Off state
0.13μA (TYP.) / Turn-On state
1000mA (VIN=2.0V, Ta=25℃)
0.2s, 1.0s, 3.0s or 5.0s
Quiescent Current
Output Current
The built-in high side switch is turned on by the Push
Button (Turning off is also possible on the A type.) and
turned off by the "L" level signal into the SHDN pin from the
MCU or the like.
The high side switch is turned on and latched by inputting
"L" signal from the Push Button of the device to the SW pin.
It is possible to shut down (OFF) by inputting a 1-pulse
signal of "H" level from the MCU or the like to the SHDN pin.
This realizes a main switch of battery operated devices
easily. (*1)
Turn-On Delay Time
Turn-Off Method
Type A
・By inputting “H” voltage to
the SHDN pin.
・By inputting “L” voltage
during the TOFFD to the SW pin.
・By inputting “H” voltage to
the SHDN pin.
Type B
Turn-Off Delay Time
Added function
:
:
3s, 5s, 10s or 15s
Power Good function (The PG pin)
The leak current at shutdown is so small, which is
1nA(TYP.), that this IC will contribute to reducing the
discharge of the battery and making shelf life longer of the
devices after shipping as well as functioning as a main
switch.
Shutdown function (the SHDN pin)
Output capacitor inrush current limit soft-start
Output capacitor discharge function
Output short circuit protection
Thermal shutdown
Protective function
For the A type, it is possible to turn off forcibly in case of
emergency by Push Button signal. This enables a freezed
device to be turned off. For the B type, turn-off is available
only with SHDN pin.
Operating Ambient Temperature
:
:
-40℃ ~ 85℃
Package
USP-8B06 (2.0 x 2.0 x h0.33mm)
The XC6194 series has a power good function (the PG pin)
for properly adjusting the timing of turning on the DC - DC
regulator or other downstream system.
In addition to these functions, this IC is equipped with
output capacitor inrush current limiting function and short-
circuit protection function, realizing an intelligent load
switch.
■APPLICATIONS
● Wearable devices
● Smart card devices
(*1) Please be sure to complete the preparation for shutting down
safely before inputting the signal to SHDN pin from the MCU or the
likes.
● Wireless headphones / Earphones
● IoT devices
● Applications with ON/OFF switch function
● Various applications equipped with buttons
● Various applications equipped with mechanical switches
● The devices with waterproof function.
■TYPICAL APPLICATION CIRCUIT
Other
Battery
CIN=0.1μF
VOUT
VOUT
VDD
VIN
CL=0.1μF
R2
PMIC or LDO
R1
R4
VIN
or
DC/DC
XC6194
PG
EN
SBD
MCU
I/O
I/O
SW
SHDN
VSS
R3
C1
Push Button
1/28