UMFT51AA-01 Datasheet
Version 1.0
Document Reference No.: FT_001141
Clearance No.: FTDI# 479
Future Technology
Devices International
Datasheet
UMFT51AA 8051
Compatible Module
UMFT51AA is an FT51A DIP module that is compatible with an 8051 microcontroller.
1.1 Features
1 Introduction
The UMFT51AA is built with a FT51AQ; many of the
features of the FT51AQ can be utilized with this
module. For a full list of the FT51A’s series features
refer to the FT51A datasheet which can be found by
clicking here.
The UMFT51AA is a development module for FTDI’s
FT51AQ, one of the devices from FTDI’s range of
microcontrollers with USB interface bridging features
integrated. FT51A is a MCU series whichincludes the
following features: USB client and USB hub
interfaces, 8051 core, 8-bit ADC, UART, SPI, I2C, 245
FIFO and PWM.
In addition to the features listed in the FT51A
datasheet, the UMFT51AA has the following features:
The UMFT51AA is a module which is designedto plug
into a standard 0.6” wide 40 pin DIP socket.
PCB assembly module is designed to fit a standard
15.24mm (0.6”) wide 40 pin DIP socket. Pins are
on a 2.54mm (0.1”) pitch. This module is a drop
in replacement for an 8051 microcontroller.
All components used, including the FT51AQ are Pb-
free (RoHS compliant).
An on board USB type A socket and plug allow
modules to be connected to a PC via a standard A
extension cable or directly. This module is also
capable of cascading several modules by utilizing
the USB hub feature.
Debugger interface header used for debugging
and programming the FT51AQ. Designed for
operation with the FTPD-1 programmer
/
debugger module. See the FTPD-1 datasheet for
details about this module.
Onboard jumper for configuring the FT51AA to be
in self powered or USB powered modes.
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or
implied.Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result ofuse or
failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any
medical appliance,device or system in which the failure of the product might reasonably be expected to result in personal injury.
This document provides preliminary information that may be subject to change without notice.No freedom to use patents or other
intellectual property rights is implied by the publication ofthis document.Future Technology Devices International Ltd, Unit 1, 2
Seaward Place,Centurion Business Park,GlasgowG41 1HH United Kingdom.Scotland Registered Company Number: SC136640
Copyright © 2015 Future Technology Devices International Limited
1