是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 零件包装代码: | SOIC |
包装说明: | SOIC-16 | 针数: | 16 |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | Factory Lead Time: | 1 week |
风险等级: | 0.76 | Is Samacsys: | N |
模拟集成电路 - 其他类型: | SWITCHING CONTROLLER | 控制模式: | VOLTAGE-MODE |
控制技术: | PULSE WIDTH MODULATION | 最大输入电压: | 14 V |
最小输入电压: | 10 V | 标称输入电压: | 12 V |
JESD-30 代码: | R-PDSO-G16 | JESD-609代码: | e4 |
长度: | 9.9 mm | 湿度敏感等级: | 1 |
功能数量: | 1 | 端子数量: | 16 |
最高工作温度: | 70 °C | 最低工作温度: | |
最大输出电流: | 1.2 A | 最大输出电压: | 5.125 V |
最小输出电压: | 4.875 V | 标称输出电压: | 5 V |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | SOP |
封装等效代码: | SOP16,.25 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE | 峰值回流温度(摄氏度): | 260 |
认证状态: | Not Qualified | 座面最大高度: | 1.58 mm |
子类别: | Switching Regulator or Controllers | 最大供电电流 (Isup): | 3.5 mA |
标称供电电压 (Vsup): | 12 V | 表面贴装: | YES |
切换器配置: | BUCK-BOOST | 最大切换频率: | 430 kHz |
技术: | BICMOS | 温度等级: | COMMERCIAL |
端子面层: | Nickel/Palladium/Gold (Ni/Pd/Au) | 端子形式: | GULL WING |
端子节距: | 1.27 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 宽度: | 3.91 mm |
Base Number Matches: | 1 |
型号 | 品牌 | 替代类型 | 描述 | 数据表 |
UCC3580DTR-1 | TI |
类似代替 |
Single Ended Active Clamp/Reset PWM | |
UCC3580DTR-1G4 | TI |
类似代替 |
Single Ended Active Clamp/Reset PWM | |
UCC2580D-1 | TI |
类似代替 |
Single Ended Active Clamp/Reset PWM |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
UCC3580D-1G4 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580D-2 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580D-3 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580D-3G4 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580D-4 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580D-4G4 | TI |
获取价格 |
Single-Ended Active Clamp/Reset PWM 16-SOIC 0 to 70 | |
UCC3580DTR-1 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580DTR-1G4 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580DTR-2 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM | |
UCC3580DTR-2G4 | TI |
获取价格 |
Single Ended Active Clamp/Reset PWM |