Datasheet > UCC3580N-2

UCC3580N-2

更新时间： 2024-11-08 12:16:55

品牌	Logo	应用领域
德州仪器 - TI		/
页数	文件大小	规格书
16页	567K
描述
Single Ended Active Clamp/Reset PWM

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

UCC3580N-2 数据手册

UCC1580-1,-2,-3,-4

UCC2580-1,-2,-3,-4

UCC3580-1,-2,-3,-4

Single Ended Active Clamp/Reset PWM

FEATURES

DESCRIPTION

Provides Auxiliary Switch Activation

Complementary to Main Power

Switch Drive

The UCC3580 family of PWM controllers is designed to implement a variety

of active clamp/reset and synchronous rectifier switching converter topolo-

gies. While containing all the necessary functions for fixed frequency, high

performance pulse width modulation, the additional feature of this design is

the inclusion of an auxiliary switch driver which complements the main

power switch, and with a programmable deadtime or delay between each

transition. The active clamp/reset technique allows operation of single

ended converters beyond 50% duty cycle while reducing voltage stresses

on the switches, and allows a greater flux swing for the power transformer.

This approach also allows a reduction in switching losses by recovering en-

ergy stored in parasitic elements such as leakage inductance and switch

capacitance.

Programmable deadtime (Turn-on

Delay) Between Activation of Each

Switch

Voltage Mode Control with

Feedforward Operation

Programmable Limits for Both

Transformer Volt- Second Product

and PWM Duty Cycle

The oscillator is programmed with two resistors and a capacitor to set

switching frequency and maximum duty cycle. A separate synchronized

ramp provides a voltage feedforward pulse width modulation and a pro-

grammed maximum volt-second limit. The generated clock from the oscilla-

tor contains both frequency and maximum duty cycle information.

High Current Gate Driver for Both

Main and Auxiliary Outputs

Multiple Protection Features with

Latched Shutdown and Soft Restart

Low Supply Current (100 mA Startup,

1.5 mA Operation)

(continued)

BLOCK DIAGRAM

UDG-95069-2

Pin Numbers refer to DIL-16 and SOIC-16 packages

SLUS292C - FEBRUARY 1999 - REVISED MAY 2005

12 3 4 5 6 7...16

中文翻译

下载PDF

UCC3580N-2 替代型号

型号	品牌	替代类型	描述	数据表
UCC2580N-4	TI	完全替代	Single Ended Active Clamp/Reset PWM
UCC3580D-3	TI	类似代替	Single Ended Active Clamp/Reset PWM

与UCC3580N-2相关器件

型号	品牌	获取价格	描述	数据表
UCC3580N-2G4	TI	获取价格	Single Ended Active Clamp/Reset PWM
UCC3580N-3	TI	获取价格	Single Ended Active Clamp/Reset PWM
UCC3580N-3G4	TI	获取价格	Single Ended Active Clamp/Reset PWM
UCC3580N-4	TI	获取价格	Single Ended Active Clamp/Reset PWM
UCC3580N-4G4	TI	获取价格	Single Ended Active Clamp/Reset PWM
UCC3580Q-1	ETC	获取价格
UCC3580Q-2	ETC	获取价格	Voltage-Mode SMPS Controller
UCC3580Q-3	TI	获取价格	Single Ended Active Clamp/Reset PWM
UCC3580Q-4	ETC	获取价格	Voltage-Mode SMPS Controller
UCC3580QTR-1	ETC	获取价格	Voltage-Mode SMPS Controller