TXS02326A
www.ti.com
SCES830 –MAY 2012
DUAL-SUPPLY 2:1 SIM CARD MULTIPLEXER/TRANSLATOR
WITH AUTOMATIC DETECTION AND SLOT DEDICATED DUAL LDO
Check for Samples: TXS02326A
1
FEATURES
RGE PACKAGE
(TOP VIEW)
•
Level Translator
VDDIO Range of 1.7-V to 3.3-V
Low-Dropout (LDO) Regulator
–
•
–
–
–
–
50-mA LDO Regulator With Enable
1.8-V or 2.95-V Selectable Output Voltage
2.3-V to 5.5-V Input Voltage Range
24 23 22 21 20 19
1
2
3
4
5
6
18
IRQ
RSTX
SDN
SIMI/O
SIMCLK
SIMRST
NC
SIM1CLK
SIM1I/O
17
16
15
14
13
Exposed
Thermal Pad
Very Low Dropout: 100 mV (Max) at 50 mA
BSI
SIM2CLK
SIM2I/O
•
•
Control and Communication Through I2C
Interface With Baseband Processor
7
8 9 10 11 12
ESD Protection Exceeds JESD 22
–
–
2500-V Human-Body Model (A114-B)
6000-V Human-Body Model (A114-B) on
VSIM1, SIM1CLK, SIM1I/O, SIM1RST, VSIM2,
SIM2CLK, SIM2I/O, SIM2RST
Note: The Exposed Thermal Pad must be
connect to Ground.
–
1000-V Charged-Device Model (C101)
•
Package
24-Pin QFN (4 mm x 4 mm)
–
DESCRIPTION/ORDERING INFORMATION
The TXS02326A is a complete dual-supply standby Smart Identity Module (SIM) card solution for interfacing
wireless baseband processors with two individual SIM subscriber cards to store data for mobile handset
applications. It is a custom device which is used to extend a single SIM/UICC interface to support two
SIMs/UICCs.
The device complies with ISO/IEC Smart-Card Interface requirements as well as GSM and 3G mobile standards.
It includes a high-speed level translator capable of supporting Class-B (2.95-V) and Class-C (1.8-V) interfaces;
two low-dropout (LDO) voltage regulators with output voltages that are selectable between 2.95-V Class-B and
1.8-V Class-C interfaces; an integrated "fast-mode" 400 kb/s "slave" I2C control register interface, for
configuration purposes; and a 32-kHz clock input, for internal timing generation. The TXS02326A also includes a
shutdown input and a comparator input that detects battery pack removal to safely power-down the two SIM
cards. The shutdown input and comparator input are equipped with two programmable debounce counter (i.e.
BSI input and SDN input) circuits realized by an 8 bit counter.
The voltage-level translator has two supply voltage pins. VDDIO sets the reference for the baseband interface
and can be operated from 1.7-V to 3.3-V. VSIM1 and VSIM2 are programmed to either 1.8-V or 2.95-V, each
supplied by an independent internal LDO regulator. The integrated LDO accepts input battery voltages from 2.3-
V to 5.5-V and outputs up to 50 mA to the B-side circuitry and external Class-B or Class-C SIM card.
ORDERING INFORMATION(1)
TA
PACKAGE(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
YJ326A
–40°C to 85°C
QFN – RGE (Pin 1, Quadrant 1) Tape and reel
TXS02326AMRGER
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2012, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.