5秒后页面跳转
TXS0101DCKR PDF预览

TXS0101DCKR

更新时间: 2024-11-25 03:25:43
品牌 Logo 应用领域
德州仪器 - TI 驱动程序和接口接口集成电路光电二极管PC
页数 文件大小 规格书
18页 591K
描述
1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS

TXS0101DCKR 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOIC
包装说明:TSSOP, TSSOP6,.08针数:6
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:0.74Samacsys Confidence:3
Samacsys Status:ReleasedSamacsys PartID:377258
Samacsys Pin Count:6Samacsys Part Category:Integrated Circuit
Samacsys Package Category:SOT23 (6-Pin)Samacsys Footprint Name:TXS0101DCKR
Samacsys Released Date:2019-05-28 10:55:19Is Samacsys:N
其他特性:ALSO OPERATES WITH 2.3 TO 5.5 VOLT接口集成电路类型:INTERFACE CIRCUIT
JESD-30 代码:R-PDSO-G6JESD-609代码:e4
长度:2 mm湿度敏感等级:1
位数:1功能数量:1
端子数量:6最高工作温度:85 °C
最低工作温度:-40 °C输出特性:3-STATE
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP6,.08封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):260
电源:1.8/3.3,2.5/5 V认证状态:Not Qualified
座面最大高度:1.1 mm子类别:Other Interface ICs
最大压摆率:0.0144 mA最大供电电压:3.6 V
最小供电电压:1.65 V标称供电电压:1.8 V
表面贴装:YES温度等级:INDUSTRIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:1.25 mm
Base Number Matches:1

TXS0101DCKR 数据手册

 浏览型号TXS0101DCKR的Datasheet PDF文件第2页浏览型号TXS0101DCKR的Datasheet PDF文件第3页浏览型号TXS0101DCKR的Datasheet PDF文件第4页浏览型号TXS0101DCKR的Datasheet PDF文件第5页浏览型号TXS0101DCKR的Datasheet PDF文件第6页浏览型号TXS0101DCKR的Datasheet PDF文件第7页 
TXS0101  
1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR  
FOR OPEN-DRAIN APPLICATIONS  
www.ti.com  
SCES638OCTOBER 2007  
1
FEATURES  
DBV, DCK, OR DRL PACKAGE  
2
Available in the Texas Instruments NanoFree™  
(TOP VIEW)  
Package  
VCCA  
GND  
A
VCCB  
OE  
B
1
2
3
6
5
4
1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on  
B port (VCCA VCCB  
)
VCC Isolation Feature – If Either VCC Input Is at  
GND, Both Ports Are in the High-Impedance  
State  
YZP PACKAGE  
(BOTTOM VIEW)  
Ioff Supports Partial-Power-Down Mode  
Operation  
3 4  
A
GND  
VCCA  
B
Latch-Up Performance Exceeds 100 mA Per  
JESD 78, Class II  
2
5
OE  
VCCB  
1 6  
ESD Protection Exceeds JESD 22  
A Port  
abc  
abc  
abc  
abc  
abc  
2500-V Human-Body Model (A114-B)  
200-V Machine Model (A115-A)  
1500-V Charged-Device Model (C101)  
B Port  
8-kV Human-Body Model (A114-B)  
200-V Machine Model (A115-A)  
1500-V Charged-Device Model (C101)  
DESCRIPTION/ORDERING INFORMATION  
This one-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to  
track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA  
must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for  
low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.  
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.  
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a  
pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.  
ORDERING INFORMATION  
TA  
PACKAGE(1)(2)  
ORDERABLE PART NUMBER  
TOP-SIDE MARKING(3)  
_ _ _2G_  
NanoFree™ – WCSP (DSBGA)  
0.23-mm Large Bump – YZP  
(Pb-free)  
Reel of 3000  
TXS0101YZPR  
Reel of 3000  
Reel of 250  
Reel of 3000  
Reel of 250  
Reel of 3000  
Reel of 250  
TXS0101DBVR  
TXS0101DBVT  
TXS0101DCKR  
TXS0101DCKT  
TXS0101DRLR  
TXS0101DRLT  
SOT (SOT-23) – DBV  
SOT (SC-70) – DCK  
SOT (SOT-563) – DRL  
2G_  
–40°C to 85°C  
NFF_  
2G_  
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.  
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI  
website at www.ti.com.  
(3) DBV/DCK/DRL: The actual top-side marking has one additional character that designates the assembly/test site.  
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following  
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
NanoFree is a trademark of Texas Instruments.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2007, Texas Instruments Incorporated  

TXS0101DCKR 替代型号

型号 品牌 替代类型 描述 数据表
TXS0101DCKRG4 TI

完全替代

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0101DCKT TI

类似代替

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS

与TXS0101DCKR相关器件

型号 品牌 获取价格 描述 数据表
TXS0101DCKRG4 TI

获取价格

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0101DCKT TI

获取价格

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0101DCKTG4 TI

获取价格

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0101DRLR TI

获取价格

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0101DRLRG4 TI

获取价格

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0101DRLT TI

获取价格

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0101YZPR TI

获取价格

1-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0102 TI

获取价格

2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS
TXS0102_09 TI

获取价格

2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS
TXS0102_10 TI

获取价格

2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS