TS78M00 series
3-Terminal Medium Current Positive Voltage Regulator
Pin assignment:
1. Input
Voltage Range 5V to 24V
Output Current up to 0.5A
2. Ground
3. Output
(Heatsink surface
connected to Pin 2)
General Description
The TS78M00 Series positive voltage regulators are identical to the popular TS7800 Series devices, except that they are
specified for only half the output current. Like the TS7800 devices, the TS78M00 Series 3-Terminal regulators are
intended for local, on-card voltage regulation.
Internal current limiting, thermal shutdown circuitry and safe-area compensation for the internal pass transistor combine
to make these devices remarkably rugged under most operating conditions. Maximum output current with adequate
heatsink is 500mA
This series is offered in 3-pin TO-220, TO-252 package.
Features
Standard Application
Output current up to 0.5A
No external components required
Internal thermal overload protection
Internal short-circuit current limiting
Output transistor safe-area compensation
Output voltage offered in 4% tolerance
A common ground is required between the input and the
output voltages. The input voltage must remain typically 2.0V
above the output voltage even during the low point on the
Input ripple voltage.
Ordering Information
Part No.
Operating Temp. Package
(Ambient)
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
TS78MxxCZ
TS78MxxCP
-20 ~ +85oC
TO-220
TO-252
** = Co is not needed for stability; however, it does improve
transient response.
Note: Where xx denotes voltage option.
Absolute Maximum Rating
Input Voltage
Input Voltage
Vin *
Vin **
35
V
V
40
Power Dissipation
TO-220
TO-220
TO-252
Without heatsink
Pt ***
2
15
W
Without heatsink
TJ
1
Operating Junction Temperature Range
Storage Temperature Range
0 ~ +150
-65 ~ +150
oC
oC
TSTG
Note : * TS78M05 to TS78M18
** TS78M24
*** Follow the derating curve
TS78M00 series
1-8
2003/12 rev. B