TS78M00L Series
3-Terminal 500mA Positive Voltage Regulator
TO-220
TO-252
(DPAK)
Pin Definition:
1. Input
2. Ground (tab)
3. Output
General Description
The TS78M00L Series positive voltage regulators are identical to the popular TS7800 Series devices, except that they
are specified for only half the output current. Like the TS7800 devices, the TS78M00L Series 3-Terminal regulators
are intended for local, on-card voltage regulation.
Internal current limiting, thermal shutdown circuitry and safe-area compensation for the internal pass transistor
combine to make these devices remarkably rugged under most operating conditions. Maximum output current with
adequate heatsink is 500mA
Features
Standard Application Circuit
●
●
●
●
●
●
●
Output Voltage Range 5 to 24V
Output current up to 500mA
No external components required
Internal thermal overload protection
Internal short-circuit current limiting
Output transistor safe-area compensation
Output voltage offered in 4% tolerance
A common ground is required between the input and
the output voltages. The input voltage must remain
typically 2.0V above the output voltage even during the
low point on the Input ripple voltage.
Ordering Information
Part No.
Package
Packing
50pcs / Tube
TS78MxxLCZ C0
TS78MxxLCP RO
TO-220
TO-252
XX = these two digits of the type number indicate
voltage.
2.5Kpcs / 13” Reel
* = Cin is required if regulator is located an appreciable
Note: Where xx denote voltage option
distance from power supply filter.
** = Co is not needed for stability; however, it does
improve transient response.
Absolute Maximum Rating (Ta = 25oC unless otherwise noted)
Parameter
Symbol
VIN*
Limit
35
Unit
V
Input Voltage
Input Voltage
VIN**
PD
40
V
Power Dissipation
Operating Junction Temperature
Storage Temperature Range
Internal Limited
0~+125
-65~+150
W
TJ
oC
oC
TSTG
Note: * TS78M05L to TS78M18L
** TS78M24L
*** Follow the derating curve
1/10
Version: B07