TS3809/3810 Series
Taiwan Semiconductor
Microprocessor Reset Circuit
GENERAL DESCRIPTION
FEATURES
The TS3809/3810 series are used for microprocessor
(µP) supervisory circuits to monitor the power supplies
in µP and digital systems. They provide excellent circuit
reliability and low cost by eliminating external
components and adjustments when used with +5V,
+3.3V, +3.0V, +2.5V powered circuits.
●
High Accurate ±2%
●
Precision monitoring of +3V, +3.3V, and +5V
Power supply voltage
●
●
●
●
●
●
●
●
Fully specified over temperature
Available in three output configurations
Push-Pull RESET low output (TS3809)
Push-Pull (RESET) high output (TS3810)
200ms typ. Power-on reset pulse width
25µs supply current
These circuits perform a single function: they assert a
reset signal whenever the VCC supply voltage declines
below a preset threshold, keeping it asserted for at least
200ms after VCC has risen above the reset threshold.
Reset thresholds suitable for operation with a variety of
supply voltages are available. TS3809/3810 series have
push pull outputs. TS3809 series has an active low
RESET output, while the TS3810 has an active high
RESET output The reset comparator is designed to
ignore fast transients on VCC, and the outputs are
guaranteed to be in the correct logic state for VCC down
to 1.0V. Low supply current makes TS3809/3810 series
ideal for use in portable equipment.
Guaranteed reset valid to VCC=+1V
Power supply transient immunity
APPLICATION
●
●
●
●
●
Battery-operated systems and controllers
Intelligent instruments
Critical µP and µC power monitoring
Portable / Battery powered equipment
Automotive
SOT-23
Pin Definition
TS3809
TS3810
1. GND
2. RESET
3. VCC
1. GND
2. (RESET)
3. VCC
TYPICAL APPLICATIN CIRCUIT
Document Number: DS_P0000206
1
Version: E15