TS3809/3810 Series
Microprocessor Reset Circuit
SOT-23
Pin Definition:
TS3809
1. GND
2. RESET
3. VCC
TS3810
1. GND
2. (RESET)
3. VCC
General Description
The TS3809/3810 series are used for microprocessor (µP) supervisory circuits to monitor the power supplies in µP
and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and
adjustments when used with +5V, +3.3V, +3.0V, +2.5V powered circuits.
These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines
below a preset threshold, keeping it asserted for at least 200ms after VCC has risen above the reset threshold.
Reset thresholds suitable for operation with a variety of supply voltages are available. TS3809/3810 series have
push pull outputs. TS3809 series have an active low RESET output, while the TS3810 has an active high RESET
output The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in
the correct logic state for VCC down to 1.0V. Low supply current makes TS3809/3810 series ideal for use in
portable equipment.
Features
Ordering Information
●
High Accurate: ±2%
Part No.
Package
Packing
●
Precision monitoring of +3V, +3.3V and +5V Power
supply voltage
TS3809CXx RF
TS3810CXx RF
SOT-23
SOT-23
3Kpcs / 7” Reel
3Kpcs / 7” Reel
●
●
●
●
●
●
●
●
Fully specified over temperature
Available in three output configurations
Push-Pull RESET low output (TS3809)
Push-Pull (RESET) high output (TS3810)
200mS typ. Power-on reset pulse width
25µS supply current
Note: x is the threshold voltage type, option as:
A : 4.63V
E : 2.93V
B : 4.38V C : 4.00V D : 3.08V
F : 2.63V G : 2.25V
Typical Application Circuit
Guaranteed reset valid to Vcc=+1V
Power supply transient immunity
Applications
●
●
●
●
●
Battery-operated systems and Controllers
Intelligent instruments
Critical uP and uC power monitoring
Portable / Battery powered equipment
Automotive
Absolute Maximum Rating
Parameter
Symbol
VCC
Maximum
Unit
V
Terminal Voltage (with respect to Gnd)
RESET & (RESET) push-pull
Input Current, VCC
GND - 0.3 to GND +6.5
VRESET
ICC
GND - 0.3 to VCC +0.3
V
20
5
mA
mA
mW
oC
Output Current, RESET, (RESET)
Power Dissipation
IO
PD
(TJ-TA)/θJA
-40 ~ +125
-65 ~ +150
10
Operating Junction Temperature Range
Storage Temperature Range
Lead Soldering Temperature (260oC)
TJ.OPR
TSTG
TLEAD
oC
S
1/7
Version: D11