TS1909
MicroPower VFM Boost DC to Dc Converter
SOT-25
Pin Definition:
1. Enable
2. Output
3. N.C
4. Ground
5. SW
General Description
The TS1909 is a high efficiency VFM Step-up DC/DC converter for small, low input voltage or battery powered
systems with ultra low quiescent supply current. The TS1909 accept a positive input voltage from start-up voltage to
VOUT and convert it to a higher output voltage in the 2.5 to 5V range.
The TS1909 combine ultra low quiescent supply current and high efficiency to give maximum battery life. The high
switching frequency and the internally limited peak inductor current permits the use of small, low cost inductors. Only
three external components are needed an inductor a diode and an output capacitor. The TS1909 is suitable to be
used in battery powered equipment where low noise, low ripple and ultra low supply current are required.
Typical applications are pagers, cameras & video camera, cellular telephones, wireless telephones, palmtop
computer, battery backup supplies, battery powered equipment.
Features
Typical Application Circuit
●
●
●
●
●
●
●
●
Very Low Supply Current 22µA (Typ.)
Maximum shutdown current <1µA
Output Voltage Accuracy ±2.5%
Output Current up to 100mA
Low Ripple and Low Noise
Very Low Start-up Voltage
High Efficiency Typ. 87% @ VOUT=5V
Few External Components
Ordering Information
Part No.
Package
SOT-25
Packing
TS1909CX5xx RF
3Kpcs / 7” Reel
Note: Where xx denotes voltage option.
Available output: 27=2.7V, 30=3V, 33=3.3V, 50=5V
Absolute Maximum Rating
Parameter
Symbol
VIN
Limit
5.5
Unit
V
VIN Pin Voltage
SW Voltage
VSW
VOUT
TSTG
TJ
5.5
V
OUT Pin Voltage
5.5
V
oC
oC
Storage Temperature Range
Operating Junction Temperature Range
Power Dissipation
-40 to +150
-20 to +100
( TJ-TA ) / θJA
110
PD
mW
oC/W
oC/W
Thermal Resistance from Junction to case
Thermal Resistance from Junction to ambient
θJC
θJA
250
Note: θJA is measured with the PCB copper area of approximately 1 inch (Multi-layer) that need connect to GND pin.
1/1
Version: A10