1
Optoway
TRSL-9140G
***********************************************************************************************************************************************************************
TRSL-9140G / TRSL-9140AG
3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-48 LR-1 / SDH STM-16 (L-16.1)
Compliant
The TRSL-9140G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-48 / SDH STM-16, gigabit Ethernet and Fiber
channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. A guaranteed
minimum optical link budget of 26 dB is offered which can
correspond to a link distance of over 40 km (assuming worst
case fiber loss of 0.45 dB/km). The transmitter section
uses a multiple quantum well 1310 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs Avalanche photodetector preamplifier
mounted in an optical header and a limiting post-amplifier
IC. A PECL logic interface simplifies interface to external
circuitry.
l Fibre Channel 2X/1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1310 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 26 dB Link Budget at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operating : TRSL-9140G
l -20 to 85oC Operating : TRSL-9140AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Switch to Switch Interface
l OC-48 ATM Links
l High Speed Interface for File Servers
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
2488
SONET
/SDH
LR-1/L-16.1
LR-1/L-16.1
Distance Wavelength Package
Temp. TX Power RX Sens.
RoHS
(km)
(nm)
(oC)
(dBm)
3 to -2
3 to -2
(dBm) Compliant
-28
-28
TRSL-9140G
40
1310 DFB 2X5 LC
0 to 70
Yes
Yes
TRSL-9140AG
2488
40
1310 DFB 2X5 LC -20 to 85
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Min
Max
85
Units
Notes
Storage Temperature
Operating Temperature
-40
0
-20
oC
oC
Topr
70
85
TRSL-9140G
TRSL-9140AG
air flow 1m/sec
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
oC
V
10 seconds on leads only
0
GND
0
Vcc
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
Typ
Max
Units
Vcc
3.13
0
-20
3.3
3.47
70
85
V
Topr
oC / TRSL-9140G
oC / TRSL-9140AG
air flow 1m/sec
Mb/s
Data Rate
622
2488
2700
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0