1
Optoway
TRSL-93120FG
***********************************************************************************************************************************************************************
TRSL-93120FG
3.3V / 1550 nm / 2.125 Gbps SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l Fibre Channel 2X / 1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet 1000BASE-ZX
Compliant
The TRSL-93120FG series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
Fibre Channel 2X/1X SM-LC-L FC-PI and IEEE 802.3z
Gigabit Ethernet 1000BASE-LX. This module is designed
for single mode fiber and operates at a nominal wavelength
of 1550 nm. A guaranteed minimum optical link budget of
30 dB is offered which can correspond to a link distance of
over 120 km (assuming worst case fiber loss of 0.22 dB/km).
The transmitter section uses a multiple quantum well
1550 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
l 30 dB Link Power Budget at Least
l Distance up to 120 km
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
Distance Wavelengt Package
Temp. TX Power RX Sens.
RoHS
(dBm) Compliant
-30 Yes
(km)
h (nm)
(oC)
(dBm)
TRSL-93120FG
2.125/1.063 200/100
120
1550 DFB 2X5 LC
0 to 70
5 to 0
Absolute Maximum Ratings
Parameter
Symbol
Tstg
Topr
---
Min
Max
85
Units
Notes
Air flow 1m/sec
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
-40
0
oC
oC
oC
V
70
260
4.5
10 seconds on leads only
Vcc
---
0
GND
0
Vcc
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Min
3.13
0
Typ
Max
3.47
70
Units / Notes
Vcc
3.3
V
oC / air flow 1m/sec
Mb/s
Topr
1063
2125
200
Power Supply Current
Icc
300
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0