Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TPS65311-Q1
SLVSCA6C –OCTOBER 2013–REVISED OCTOBER 2017
TPS65311-Q1 High-Voltage Power-Management IC for Automotive Applications
1 Features
2 Applications
1
•
Qualified for Automotive Applications
•
•
Multi-Rail DC Power Distribution Systems
Safety-Relevant Automotive Applications
•
AEC-Q100 Test Guidance With the Following
Results:
–
Advanced Driver Assistance Systems
–
Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
3 Description
The TPS65311-Q1 device is a power-management IC
(PMIC), meeting the requirements of digital-signal-
processor (DSP) controlled-automotive systems (for
example, advanced driver-assistance systems). With
the integration of commonly used supply rails and
features, the TPS65311-Q1 device significantly
reduces board space and system costs.
–
–
Device HBM ESD Classification Level H1B
Device CDM ESD Classification Level C4B
•
•
Input Voltage Range: 4 V to 40 V, Transients up
to 60 V; 80 V When Using External PMOS-FET
Single-Output Synchronous-Buck Controller
–
–
–
Peak Gate-Drive Current 0.6 A
The device is capable of providing stable output
voltages to the application, including a typical 5-V
CAN-supply, from a varying input power supply (such
as an automotive car battery) from 4 V to 40 V. The
device includes one synchronous buck controller as a
pre-regulator that offers flexible output power to the
application. For post-regulation, the device includes
two synchronous buck and one asynchronous boost
converter, working at a switching frequency of 2.45
MHz to allow for a smaller inductor which requires
less board space. The two buck converters also offer
internal loop compensation which eliminates the need
for external compensation components. Furthermore,
the device includes a low-noise linear regulator.
490-kHz Fixed Switching Frequency
Pseudo Random Frequency-Hopping Spread
Spectrum or Triangular Mode
•
Dual-Synchronous Buck Converter
–
–
–
Designed for Output Currents up to 2 A
Out of Phase Switching
Switching Frequency: 2.45 MHz
•
•
Adjustable 350-mA Linear Regulator
Adjustable Asynchronous-Boost Converter
–
–
1-A Integrated Switch
Switching Frequency: 2.45 MHz
•
•
•
Soft-Start Feature for All Regulator Outputs
Independent Voltage Monitoring
Device Information(1)
DEVICE NAME
PACKAGE
VQFN (56)
VQFNP (56)
BODY SIZE
Undervoltage (UV) Detection and Overvoltage
(OV) Protection
8.00 mm × 8.00 mm
8.00 mm × 8.00 mm
TPS65311-Q1
•
•
Short Circuit, Overcurrent, and Thermal Protection
on all supply output rails
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Serial-Peripheral Interface (SPI) for Control and
Diagnostic
Simplified Schematic
•
•
•
Integrated Window Watchdog (WD)
Reference Voltage Output
VBAT
High-Side (HS) Driver for Use with External
PMOS-FET for driving an LED
VBuck1
VBuck1
VBoost
•
•
Input for External Temperature Sensor for
Shutdown at TA < –40°C
TPS65311-Q1
VBuck1
VBuck1
Thermally Enhanced Packages With Exposed
Thermal Pad
VBuck3
VBuck2
–
56-Pin VQFN (RVJ) or 56-Pin VQFNP (RWE)
VLDO
Logic I/O
(SPI, Watchdog, Reset)
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.