Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TPS65400
SLVSCQ9B –NOVEMBER 2014–REVISED SEPTEMBER 2015
TPS65400 4.5- to 18-V Input Flexible Power Management Unit With PMBus/I2C Interface
1 Features
Size
–
Adjustable Current Limit on Each Regulator
Enables Size and Cost Optimization of
Inductors
1
•
•
Efficiency up to 95% for Each Switching Regulator
Switching Regulator Specifications:
–
–
–
–
Input Voltage Range: 4.5 to 18 V
Vout Range: 0.6 V-90%Vin
SW1, SW2 Iout: 4-A Max
SW3, SW4 Iout: 2-A Max
–
Soft-Start Time
2 Applications
•
Small Cellular Base Stations (BTS) (for Example:
Picocells and Microcells); Macro BTS (Using
Multiple PMUs)
•
•
Pre-Bias Startup Algorithm Minimizes Voltage Dip
During Startup
Internal Undervoltage Lockout (UVLO),
Overcurrent Protection (OCP), Overvoltage
Protection (OVP), and Overtemperature Protection
(OTP)
•
Power over Ethernet (PoE) Powered
Communications Infrastructure Equipment
•
•
•
•
Automotive Infotainment and Telematics
Powering DSP and MCUs
•
•
AECQ-100 Grade 1 Option
Industrial and Factory Automation
Thermally-Enhanced 7-mm × 7-mm 48-Pin, 0.5-
mm Pitch VQFN Package
Systems Requiring Small Form Factor, High-
Efficiency, High-Ambient Operating Temperature,
and Flexible Power Management
•
Pin Accessible Features:
–
–
–
Adjustable VOUT With External Feedback
Resistors
3 Description
Sequencing Control Through Precision Enable
Pins for Each Switcher
The TPS65400 is an integrated PMU optimized for
applications requiring small form factor and high
power conversion efficiency, enabling small space-
constrained equipment with high ambient operating
temperature without cooling. It provides high-power
efficiency at a system level by enabling a single stage
conversion from an intermediate distribution bus with
an optimized combination of regulators.
Resistor Adjustable PWM Switching Frequency
from 275 kHz to 2.2 MHz
–
–
–
Clock Sync Input and Clock Output
Soft-Start Delay Through External Capacitor
Current Sharing Between SW1 and SW2 and
Between SW3 and SW4 Allows Support of
Higher Current Needs if Required
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
•
•
PMBus Runtime Control and Status
TPS65400
VQFN (48)
7.00 mm × 7.00 mm
–
Runtime Voltage Positioning Through
Adjustment of VREF
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
–
–
Enable and Disable of Each Switcher
Simplified Schematic
Fault and Status Monitoring
User-Configurable PMBus / I2C Options, Saved in
EEPROM
Vin: 4.5 to 18 V
4 A
4 A
2 A
2 A
–
–
–
Power Supply Turn-On and Turn-Off
Sequencing
BUCK1
BUCK2
BUCK4
BUCK3
Sequencing can be Based on Fixed Time
Delays or PGOOD Dependence
Initial Voltage Positioning Through VREF
Configuration
PMBus/I2C
–
–
PWM Frequency Adjustment for Each Switcher
Individual PWM Phase Alignment for Each
Switcher to Minimize Ripple and Capacitor
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.