Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TPS65320D-Q1
SLVSE56 –NOVEMBER 2017
TPS65320D-Q1 36-V Step-Down Converter With Eco-mode™ and LDO Regulator
1 Features
2 Applications
1
•
Qualified for Automotive Applications
•
•
•
Automotive Infotainment and Cluster
Advanced Driver Assistance System (ADAS)
Automotive Telematics, eCall
•
AEC-Q100 Qualified with the Following Results:
–
Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
3 Description
–
–
Device HBM ESD Classification Level 2
Device CDM ESD Classification Level C4B
The TPS65320D-Q1 device is a combination of a
high-VIN DC-DC step-down converter, referred to as
the buck regulator, with an adjustable switch-mode
frequency from 100-kHz to 2.5-MHz, and a high-VIN
280-mA low-dropout (LDO) regulator. The input range
is 3.6 V to 36 V for the buck regulator, and 3 V to
36 V for the LDO regulator. The buck regulator has
an integrated high-side MOSFET. The LDO regulator
features a low-input supply current of 45-μA typical in
no-load, also has an integrated MOSFET with an
active-low, push-pull reset output pin. The input
supply of the LDO regulator auto-source from the
output of the buck regulator when it is in operation.
Low-voltage tracking feature enables TPS65320D-Q1
to track the input supply during cold-crank conditions.
•
One High-VIN Step-Down DC-DC Converter
–
–
–
Input Range of 3.6 V to 36 V
250-mΩ High-Side MOSFET
Maximum Load Current 3.2 A, Output
Adjustable 1.1 V to 20 V
–
Adjustable Switching Frequency 100 kHz to
2.5 MHz
–
–
Synchronizes to External Clock
High Efficiency at Light Loads With Pulse-
Skipping Eco-mode™ Control Scheme
–
Maximum 140-µA Operating Quiescent
Current
The buck regulator provides a flexible design to fit
system needs. The external loop compensation circuit
allows for optimization of the converter response for
the appropriate operating conditions. A low-ripple
pulse-skip mode reduces the no-load input-supply
current to maximum 140 μA.
•
One Low-Dropout Voltage (LDO) Regulator
–
Input Range of 3 V to 20 V, With Auto-Source
to Balance Efficiency and Lower Standby
Current
–
280-mA Current Capability With Typical 35-µA
Quiescent Current in No-Load Condition
The device has built-in protection features such as
soft start, current-limit, thermal sensing and shutdown
due to excessive power dissipation. Furthermore, the
device has an internal undervoltage-lockout (UVLO)
function that turns off the device when the supply
voltage is too low.
–
–
Power-Good Output (Push-Pull)
Low-Dropout Voltage of 300 mV at
IO = 200 mA (Typical)
•
•
•
Overcurrent Protection for Both Regulators
Overtemperature Protection
Device Information(1)
14-Pin HTSSOP Package With PowerPAD™
Integrated Circuit Package
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS65320D-Q1
HTSSOP (14)
5.00 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Schematic
Buck Efficiency Versus Output Current
100
90
80
70
60
50
40
30
20
VIN_LDO
BOOT
SW
1.1 V to 20 V,
3.2 A
VI = 3.6 V to 36 V
Supply
VIN
5 V
EN1
EN2
LDO Input
Auto Source
FB1
COMP
RT/CLK
SS
1.1 V to 5.5 V,
280 mA
LDO_OUT
fs = 300 kHz
10
fs = 2 MHz
0
GND
Regulator
Control
FB2
RST
0
1
2
3
4
Load Current (A)
PowerPAD
D001
TPS65321-Q1
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.