TPS62120
TPS62122
www.ti.com
SLVSAD5 –JULY 2010
15V, 75mA High Efficient Buck Converter
Check for Samples: TPS62120 , TPS62122
1
FEATURES
DESCRIPTION
•
•
•
Wide Input Voltage Range 2V to 15V
Up to 96% Efficiency
The TPS6212X device family is a high efficient
synchronous step down DC-DC converter optimized
for low power applications. It supports up to 75mA
output current and allows the use of tiny external
inductors and capacitors.
Power Save Mode with 11 µA Quiescent
Current
•
•
•
•
•
•
•
Output Current 75mA
Output Voltage Range 1.2V to 5.5V
Up to 800kHz Switch Frequency
Synchronous Converter, no External Rectifier
Low Output Ripple Voltage
The wide operating input voltage range of 2V to 15V
supports energy harvesting, battery powered and as
well 9V or 12V line powered applications.
With its advanced hysteretic control scheme the
converter provides power save mode operation. At
light loads the converter operates in PFM mode
(pulse frequency modulation) and transitions
automatically in PWM (pulse width modulation) mode
at higher load currents. The Power Save Mode
maintains high efficiency over the entire load current
range. The hysteretic control scheme is optimized for
low output ripple voltage in PFM mode in order to
reduce output noise to a minimum. It consumes only
10uA quiescent current from VIN in PFM mode
operation.
100% Duty Cycle for Lowest Dropout
Small SOT 8 pin (TPS62120) and 2x2 SON 6
pin (TPS62122) Package
•
•
•
Internal Soft Start
Power Good Open Drain Output TPS62120
Open Drain Output for Output Discharge
TPS62120
•
2.5V Rising / 1.85V Falling UVLO Thresholds
APPLICATIONS
In shutdown mode, the device is turned off.
•
•
•
•
Low Power RF Applications
Ultra Low Power Microprocessor
Energy Harvesting
An open drain power good output is available in the
TPS62120 and indicates once the output voltage is in
regulation.
Industrial Measuring
TPS62120 has an additional SGND pin which is
connected to GND during shutdown mode. This
output can be used to discharge the output capacitor.
The TPS62120 is available in a small 3×3 mm2 8 pin
SOT 23 package and the TPS62122 in a 2×2 mm2 6
pin SON package.
100
V
= 5.5 V
IN
V
= 1.8 V
90
80
OUT
up to 75 mA
TPS62120
V
= 2.5 V to 15 V
IN
V
= 8 V
L 22 mH
IN
VIN
EN
SW
FB
V
= 10 V
IN
R
1
V
= 12 V
IN
C
OUT
4.7 mF
300 kW
V
= 15 V
IN
Cff
22 pF
70
60
C
IN
4.7 mF
R
2
240 kW
GND
VOUT
50
40
30
V
= 5 V,
O
R
SGND
PG
pullup 100kW
L = 18 mH,
LPS3015,
PWR GOOD
C
= 4.7 mF
O
0.1
1
10
- Output Current - mA
100
I
O
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated