TPS62125
www.ti.com
SLVSAQ5A –MARCH 2012–REVISED APRIL 2012
3V-17V, 300mA Step Down Converter With Adjustable Enable Threshold And Hysteresis
Check for Samples: TPS62125
1
FEATURES
DESCRIPTION
The TPS62125 is a high efficiency synchronous step
down converter optimized for low and ultra low power
applications providing up to 300mA output current.
The wide input voltage range of 3V to 17V supports
four cell alkaline and 1 to 4 cell Li-Ion batteries in
series configuration as well as 9V to 15V powered
applications. The device includes a precise low power
enable comparator which can be used as an input
supply voltage supervisor (SVS) to address system
specific power up and down requirements. The
enable comparator consumes only 6µA quiescent
current and features an accurate threshold of 1.2V
typical as well as an adjustable hysteresis. With this
feature, the converter can generate a power supply
rail by extracting energy from a storage capacitor fed
•
•
Wide Input Voltage Range 3V to 17V
Input SVS (Supply Voltage Supervisor) with
Adjustable Threshold / Hysteresis Consuming
typ. 6µA Quiescent Current
•
•
•
•
•
•
•
•
Wide Output Voltage Range 1.2V to 10V
Typ. 13 µA Quiescent Current
350nA typ. Shutdown Current
Seamless Power Save Mode Transition
DCS-ControlTM Scheme
Low Output Ripple Voltage
Up to 1MHz Switching Frequency
Highest Efficiency over Wide VIN and VOUT
Range
from high impedance sources such as solar panels or
TM
current loops. With its DCS - Control
scheme the
•
•
•
•
•
Pin to Pin Compatible with TPS62160/70
100% Duty Cycle Mode
converter provides power save mode operation to
maintain highest efficiency over the entire load
current range. At light loads the converter operates in
PFM mode (pulse frequency modulation) and
transitions seamlessly and automatically in PWM
(pulse width modulation) mode at higher load
currents. The DCS - ControlTM scheme is optimized
for low output ripple voltage in PFM mode in order to
reduce output noise to a minimum and features
excellent AC load regulation. An open drain power
good output indicates once the output voltage is in
regulation.
Power Good Open Drain Output
Output Discharge Function
Small 2x2mm2 SON 8 pin Package
APPLICATIONS
•
•
Embedded processing
4 cell alkaline, 1-4 cell Li-Ion battery powered
applications
•
•
•
9V - 15V standby power supply
Energy harvesting
Inverter (negative VOUT)
95
10mA
100mA
90
85
80
75
70
65
60
55
50
VOUT = 3.3V
up to 300mA
TPS62125
250mA
VIN = 4V to 17V
L 15µH
SW
VIN
1.0mA
R1
1.8M
COUT
10µF
VOS
FB
EN
CIN
10µF
R2
0.25mA
576k
EN_hys
GND
VOUT = 3.3V
L = 15mH VLF302515
COUT = 10mF
Rpullup
0.1mA
PG
PWR GOOD
4
5
6
7
8
9
10 11 12 13 14 15 16 17
Input Voltage VIN(V)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated